-
Ccbrab replied to the thread Ford 1900 clutch issue.So it turns out that both pins in the clutch fork were broken allowing the fork to move in ways it shouldn't and throwing off its...
-
Ccbrab replied to the thread Ford 1900 clutch issue.I noticed that theres only 1 pin on the fork, the other ones missing, but it looks like it's still functional. The fork can get...
-
Ccbrab replied to the thread Ford 1900 clutch issue.Very thick, clutch must've been replaced recently.
-
Ccbrab replied to the thread Ford 1900 clutch issue.Which part do you mean? Here's a couple pictures of the adjustable rod that pivots with the pedal and throws the bearing forward inside...
-
-
Ccbrab replied to the thread Ford 1900 clutch issue.I took off the pressure plate today and it seems fine. Looks like the problem is that for some reason the throw out bearing isnt...
-
-
Ccbrab replied to the thread Ford 1900 clutch issue.So I split the tractor today and the first thing I'm wondering is how far that throw out bearing should travel when the clutch pedal is...
-
Ccbrab replied to the thread Ford 1900 clutch issue.I do. I saw that the pto clutch can be adjusted through that hole and of course the pedal linkage l. Not sure if I saw any other...
-
Ccbrab replied to the thread Ford 1900 clutch issue.I I did. It seems to
-
Ccbrab replied to the thread Ford 1900 clutch issue.That's what I thought and I'm not seeing any gap. Thanks
-
Ccbrab replied to the thread Ford 1900 clutch issue.I've already adjusted it as much as possible and still nothing. I'm hoping I can free it up driving it around and stomping the brakes
-
Ccbrab replied to the thread Ford 1900 clutch issue.Yes, the whole distance that the pedal can move is free with no resistance except for a bit of resistance at the last inch or so of...
-
Ccbrab replied to the thread Ford 1900 clutch issue.Can you see a gap between the clutch and flywheel when it's free?
-
Ccbrab replied to the thread Ford 1900 clutch issue.Hmm, that's possible. I don't think I stressed the clutch too hard other than spinning the wheels in the dirt in 4wd. But maybe that...
-
Ccbrab replied to the thread Ford 1900 clutch issue.Oh okay. I'd say the conditions were right I guess, bell housing had been sitting in damp soil when I got it stuck and it probably...
-
CI recently bought a Ford 1900 with the dual stage clutch. I should say I noticed the gears liked to grind when shifting, I thought it...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy