(800) 853-2651
SHOP NOW

Recent content by Chris Klein

Yesterday's Tractor Forums
  1. C

    MW hand clutch question

    I can not do pictures right now. What I really need to know is I have the bull gear shaft that the brake drum goes on. The shaft was pulled from the trans but my real question is everything from that point back into the trans the same ? I got the clutch from a local scrap yard and the rest...
  2. C

    MW hand clutch question

    I found a hand clutch off of a 45 M but I am not sure if it is complete. My question is what all parts would have come with it when bought new ? Thanks Chris
  3. C

    Sherman power digger

    I just looked at an old Massey with a sherman power digger model 54F100 on it. Does anyone have any info specs or opinions on the hoe ? The tractor is not running right now but should not take a whole lot. My main interest is for the hoe and not the tractor
  4. C

    Farmall 300 Eliminate hydraulic pump ???NEED HELP ASAP

    How can I tell if it is a late 50 ? I have a 50 H but I know the engine has been changed. I will pull it off the H so I can bale what I have cut right now to get through until I get seals
  5. C

    Farmall 300 Eliminate hydraulic pump ???NEED HELP ASAP

    I just lost a hydraulic pump on my 300 and need to bale hay with it. The hay is already cut. Can I eliminate the distributor pump by changing to the casting like on the H ??? If so what other tractors can the casting come off of ?? I only need to get through the next couple days with it
  6. C

    Farmall H horsepower

    I have a very tired H and need to finally do a rebuild on it. I am looking for ways to gain a few horsepower at the same time. I don't want to get too nuts with it because I still need to work it. Also I know they had the chopper gears for the M did they have them for the H too ? If so can...
  7. C

    Ferguson TO35 PTO

    I have a 55 TO35 that has the live pto but from what I found it looks like it was not an option until later on. Was it actually ann option in 55 or is the year not correct ? According to the S/N it should be a 55. Thanks for any info you can give
  8. C

    Cub hp question

    Where did they get the hp increase in the later cubs ? I have a 50 cub that the engine is supposed to be a rebuild but I have a belly mower under it and I am looking to gain some hp. What can I use from the later cubs to help out. Thanks for any help you can give me
  9. C

    IH 300 utility Pesco hydraulic pump parts

    I have a 300 utility with a Pesco hydraulic pump. Can anyone point me in the right direction to get bearings and other parts for the pump ? I know all the seals can still be found. Thanks for any help you can give me
  10. C

    IH 300 Torque amplifier

    It appears to be in neutral but I tried to move the shift rails last night. They are all in the neutral position but the 1st/ reverse rail will not move. This thing will not turn through the trans unless the clutch is pushed down. I also can not turn the pto either. The story I have gotton on...
  11. C

    IH 300 Torque amplifier

    I just dragged home a 55 IH 300 utility in non running condition. The problem I am having right now is that it will not roll unless the clutch is pushed down. All it will do is the rear wheels will turn in opposite directions as if it was in gear. Also the engine will not turn unless the...
  12. C

    Ford 3600 Question about different versions

    I have a ford 3600 and am trying to identify exactly which one it is. I am findind information on the NH parts search for a 3600 , 3600N and 3600V My question is what is the difference ? Mine at one point had a hydraulic sweeper mounted on it and the hydraulic lift was modified. Also does...
  13. C

    Massey 3165

    I am looking at a Massey Ferguson 3165 diesel with a loader on it. I have not been able to find alot of information on the 3165. Can anyone help ? Also this one is stuck but the tractor is not in bad shape other than that. Can anyone give me an idea of what it is worth ? Thanks
  14. C

    1941 A water pump conversion ?

    I have a 41 A I know the 113 was also made with a water pump. I have been told that one can be added to mine. Can it be done ? What all needs changed ? Is the head and bolck the same ? I know I have a head gasket problem so now would be the time to make the change if possible. Thanks For any...
  15. C

    Case 420 crawler engine

    What gas engine was used in the case 420 crawler? Does anyone have specs on this thing like horse power and weight ?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top