Recent content by Clyde Parrish

  1. C

    NH 850 baler tailgate will not stay closed

    Rebuild the hydraulic cylinders. The packings inside are bad. Happened to me 2 weeks ago. I rebuilt mine in the field and went back to work in a just a little while. Costed $22 per side for parts at the new holland dealer.
  2. C

    New Idea 402 Rake Belt

    I just bought a belt the other day for mine. I called the dealer. $180 so I went over to mcmastercarrs website and bought 13feet of 3/4" adjustable round belting. You only need about 12 feet but I wanted to be sure. I put it on and I am ready to go. Also the adjustable belt is $11 a foot but its...
  3. C

    NH 846 chain baler bolts are nuts!

    I live in nashville tn and I went to our local bolt and screw place. Bought grade 5 bolts and lock nuts. Never had any trouble and I think the bolts and nuts were about $33
  4. C

    180 injection pump problems

    Yes I have cracked the lines. I have them all cracked.
  5. C

    180 injection pump problems

    O.k. Let me explain what I have done then someone fill me in on where I am going wrong. I bought this 180 not running and not getting fuel to the injectors. No problem there now I get it home check it out see that there is fuel flowing from the tank. Undo some of the lines make sure the lift...
  6. C

    engine stuck on poppin Johnny

    If you already have the head off why not take the rods loose and pull rods and cylinder block. Then stand it on end and dump a little brake fluid and diesel mix on top of the pistons and light it. Then when its good and warm they will tap right out with a block of wood. I remember clooney...
  7. C

    180 Massey fuel problems.

    O.k. I tried both suggestions. I put the fuel to the max position and also took a couple of rubber hoses and rigged up an electric fuel pump inline to the injector pump so that I knew without a doubt that I had plenty of fuel to the pump. I bled the two bleed screws and the fuel will "jet" out...
  8. C

    180 Massey fuel problems.

    Hey I picked up a 180 today pretty cheap. Its not running but its also not getting any fuel to the injectors. I have a manual because this is my second 180. I have blead the 2 small screws on the pump and I have good fuel there squirting out with no air bubbles. But even when turning the engine...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top