Recent content by Dale Thomas

  1. D

    951 Powermatic Ford

    I have a 951 Powermatic Ford on LP with a serial number of 46222 which makes it a 1958 model. Did this tractor come with factory LP? My question raises a concern regarding the hood and fuel tank. There are gaps between the front of the tank and the tractor just above the radiator and also at the...
  2. D

    John Deere L Ser.#630130 (1940 Model)

    Thanks for the information.
  3. D

    John Deere L Ser.#630130 (1940 Model)

    Thanks for your response. Will try it.
  4. D

    John Deere L Ser.#630130 (1940 Model)

    Helping some High School Kids time their JD L tractor (valve). Not present when camshaft, crankshaft, idler & magneto were removed. Several marks have been made plus factory marks on all 4 gears. Anyone have experience with how to solve this problem. Any reference that anyone can refer me to. Thanks
  5. D

    1937 F Farmall

    Thanks Royse.
  6. D

    1937 F Farmall

    Completely restoring a 1937 F-30 Farmall. What color do I paint her? I assume the entire tractor is one color including rims! Have worked on hood all day. Still has dents. Also looking for a hood with the large hole on left side of hood for exhaust. The hole is reinforced with a cast iron rim...
  7. D

    C Allis Chalmers

    Thanks to those who responded to the C Allis Chalmers. We are still trying to correct the over flow problem.
  8. D

    C Allis Chalmers

    We have restored a 1941 C Allis Chalmers. After several hrs. on a dyno to break in we had a small water leak. Fixed the leak by a tighter turn on a clamp. All the time on dyno the tractor did flow water from the over flow tube. After fixing the water leak engine wants to discharge water through...
  9. D

    C Allis Chalmers

    Thanks. I will check that also.
  10. D

    C Allis Chalmers

    Checked that first. With the C AC 1/2" pipe screwed to the block with siphon tube attached at the bottom. No plugs were removed. Thanks so much for the response.
  11. D

    C Allis Chalmers

    It attaches at the metal base. Don't know if it is packed with fifer. will check. Thanks.
  12. D

    C Allis Chalmers

    Thanks. Will try that method of priming.
  13. D

    C Allis Chalmers

    Thanks. Will give it another look.
  14. D

    C Allis Chalmers

    Rebuilding a 1941 C Allis Chalmers tractor with a 125 cu. inch 4 cylinder gasoline. Starter engine after overhaul with no engine oil pressure. Tried different pressure guage and primed pump. No pressure. Broke tractor into again and removed the oil pump. Order a complete rebuild kit for the pump...
  15. D

    John Deere H (1941 Model)

    Ag. students are restoring my JD H. for Ag. Mechanics Contest. Having difficulty getting the clutch adjusted. Any thoughts? Also having difficulty with the flywheel moving on the crankshaft when running. Tightened all the way down. Searing for other options to keep flywheel in place.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top