(800) 853-2651
SHOP NOW

Recent content by David in TN

Yesterday's Tractor Forums
  1. D

    hydraulic system

    Yea, I thought about one good cyl would hold it up. I will check each one. May rebuild both. But It don't make sense that it would stay up with plugs in the cyls, but not with the lines on with bran new spool valve. I did notice when I removed the plugs pressure build up was a lot more in one...
  2. D

    hydraulic system

    The bucket on my tractor would not stay rotated up. The loader its self would stay up, but the bucket would rotate down into the dump position. So I removed the lower lines on the bucket cylinders and put plugs in the cyls and lifted the loader and it stayed up. So I replaced the valve body...
  3. D

    hydraulic system

    Tractor is JD 2630 with a 145 loader. I have changed the hyd fluid & filter and replaced the valve body and six hoses for the loader, including the long ones from the remote and back to the filter. How should I work the air out of the system? Should I leave one or two lines loose up front and...
  4. D

    Galv Gate

    Will enamel stick to galvanizing? Any special prep? I have an old gate that I'd like to paint either JD green or barn red. Thanks!! DD
  5. D

    H john deere weight

    about 3000 lbs
  6. D

    Working by yourself

    gadabout? That's an interesting word, had to look it up, never heard it before.
  7. D

    OT--Trailer Brakes

    I have a semi trailer that I use for storage and I want to move it forward a few feet. There are two air fittings on the front of it, one says service and I think the other says emergency, best I remember. I can get an air line to it from my shop compressor. If I tap into the service line and...
  8. D

    spool valves

    Are the control valves on front end loaders rebuildable? Do they have O-rings in them that you can replace and hopefully fix a leaky valve or do you just have to buy a whole new setup?
  9. D

    Big truck parking brakes

    This is off topic, but...I have a semi trailer that I use for storage and I want to move it forward a few feet. There are two air fittings on the front of it, one says service and I think the other says emergency, best I remember. I can get an air line to it from my shop compressor. If I tap...
  10. D

    Hyd problems

    Well, howdy neighbor!! Centerville huh? I lived in McMinnville until I'z about 14 (1975) we use to go up to your neck of the woods for some fishing and to some restaraunt that had awesome catfish. I still have some kinfolk around those parts. I live in Bradley county now.
  11. D

    Hyd problems

    I've studied it a bit more and found that the loader will stay up even with the tractor turned off. But the bucket will not, it rotates downward as if you were dumping. And it will continue all of the way to where it's hanging straight down. The cyl rams are rust free and don't have any groves...
  12. D

    Hyd problems

    On this 2630 that I just bought, the bucket cylinders leak down letting the bucket roll down...and it happens pretty quick, you pretty much have to keep the lever pulled to keep it rolled up. One of the lines was dripping so I replaced it, but it didn't help. So I guess it would be the spool...
  13. D

    New 2630 Loader ID help

    It is a 145 then. Is that good? It seems to be built pretty strong and is in good shape. It has a leaky line that I'll replace later today (bucket won't stay tilted up) other than that everything is working fine so far. Thanks!! DD
  14. D

    New 2630 Loader ID help

    Well, I am the proud new owner of a JD 2630. I get to try it out for the first time today by moving around and burning some tree tops and brush...and I can hardly wait. I feel like a kid at Christmas :) This is my first JD, I've had a little Ford 2000 since 1975. I've been like the biker dude...
  15. D

    Tractor unloading safety!

    I went trailer surfing for about fiftey feet about a month ago. I was parked on a gravel drive with a slight hill and went to load a ford 2000 and I went for a ride!! Luckily I gathered my thoughts soon enough to put the tractor in reverse and back back off of the trailer and my truck missed a...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top