Recent content by David Wave

  1. D

    Hyd. piston seal install?

    I am replacing the piston seals on the loader on my Jubilee. The Hyd. guy that sold me the seals said the wide part of the seal (Vpacking type seal) goes towards the highest expected pressure. In my case this means the wide part of the seal goes into the cyd. first, so it wants to keep...
  2. D

    OIl for a Jubilee

    All right guys, I am convinced. I am off to get some detergent oil. Thanks so much for all your input! -Dave
  3. D

    OIl for a Jubilee

    Any opinon if using detergent oils can cause a leak? I have seen at least one anectdote that said that they got lots of oil leaks after switching to detergent. Thanks, -Dave
  4. D

    OIl for a Jubilee

    I just bought a Jubilee that has not had an oil change in forever by the looks of the filter. I have heard talk of problems being created by using detergent oil in these old tractors (I have no idea what is in it right now). Any thoughts as to what grade to put back in it? It will only be used...
  5. D

    Jubilee PTO conversion?

    I am a new Jubilee owner. I plan on working the tractor an need it to run "modern" equipment via the PTO. I have been told the stock PTO is 1 1/8 vs the 1 3/8 for most implements today, requiring a conversion. I found a conversion shaft for about $150, just bolts in. Or a overrunning coupler...
  6. D

    WD45 Questions

    I need a smaller 30-40hp tractor with 3point and PTO. A WD45 is coming up for auction near me, and as I know about nothing about these tractors, I had a couple questions perhaps somebody could help me with: Did all the WD45's come with PTO? Are the output shafts "standard" ie I can attach a...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top