Recent content by Devon B

  1. D

    1950 John Deere A Gear Shift

    With both of yalls advice, I hope this fixes my problem until the next problem arises.
  2. D

    1950 John Deere A Gear Shift

    Thank you so much for you help....I hope this fixes my situation.
  3. D

    1950 John Deere A Gear Shift

    My daughter and I are still at it on our 1950 JD A. We went to put the gear shift tower on and once we bolted it into position, I could only get it to go in two gears. I'm not sure how to set it before putting the shifter back on. The photo is what I found when I pulled the shifter off. I do...
  4. D

    Model A Flywheel Spacer

    My daughter and I are still hard at it restoring her 1950 JD A and have ran into a little problem. The crankshaft was removed and had some work done to it and well as the rods. We removed the flywheel and spacer but read later we were supposed to mark it and put it back in the same place. How...
  5. D

    John Deere A rod and crank problems

    My daughter and I have been working on a 1950 JD A for sometime and ran into an issue with the rods and crank. The crank is original to the motor but the rods and pistons are not. They were beyond repair. We used plasti gauge and got the .003 per the service manual but as we turned the...
  6. D

    Needing Fan Pulley for John Deere A

    This guy is AWESOME!!!!...very friendly and has excellent parts for my daughter's tractor
  7. D

    John Deere A Connecting Rod Bearings

    My daughter and I are still working on the 1950 JD A and are working on the pistons and rods. I noticed there wasn't any connecting rod bearings and just used shims. Do they make connecting rod bearings or do I just used "trial and error" with the shims until I get the correct clearance and...
  8. D

    Needing Fan Pulley for John Deere A

    Thank yall so much for the leads on the part.
  9. D

    Needing Fan Pulley for John Deere A

    My youngest daughter and I are restoring a 1950 John Deere A and I am having trouble locating a fan pulley. The part number is B2124R. I see several online but the splines on them appear to be nonexistent. Can anyone give me a lead on one that is in good shape? Thanks!!
  10. D

    Need JD Engine Block

    I am on a quest to find a John Deere A engine block. I discovered the block had a large crack (ok hole) in it. If anyone can point me in the direction of a A4320R would be graciously appreciated.
  11. D

    What Year is My JD A

  12. D

    What Year is My JD A

    Engine block number
  13. D

    What Year is My JD A

  14. D

    What Year is My JD A

  15. D

    What Year is My JD A

Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top