Recent content by Doug Weigle

  1. D

    Case 580B Stearing and Brake Puzzle

    Thank You very much
  2. D

    Case 580B Stearing and Brake Puzzle

    I am telling you...you always make such good sense. I am going to remove the existing cylinders and have them rebuilt. I can't thank you enough! By the way...did the 580B have a master cylinder in the braking system? (Have been so busy...haven't had time to tear the dash apart yet, but am...
  3. D

    Case 580B Stearing and Brake Puzzle

    mEI...now I don't mean to be cheap, but having a "local" Hydraulic repair shop rebuild both hydraulic steering cylinders (under the machine attached to the front wheel assembly) is gonna be very expensive versus buying "new" cylinders off the internet from off market locations. Now you have...
  4. D

    Case 580B Stearing and Brake Puzzle

    My name is Doug. I have two puzzling problems this forum may be able to help me with. I have an old Case 580B backhoe that I have rebuilt, but have two puzzling problems. 1. The steering on the backhoe is acting very strange and barely works. I can be sitting in idle and I turn the steering...
  5. D

    Continuous Bursting Hydraulic Line

    I have a Case 580 B backhoe. And I need some help. As part of the valve nest under the (backhoe) valve nest (in the rear) there is a hydraulic return line that comes off the valve nest on the left side, and attaches to the return line, which exits under the valve nest through the wall on the...
  6. D

    Need Some Help with my Case 580E Starter

    Need a little help. I have a Case 580E Backhoe and believe I to replace the starter motor. My battery reads 12.7 to 14.1 VDC and the solenoid clicks…but no initiation of the starter motor. My backhoe has a diesel engine. Looks like the Starter Assembly is a two part assembly with the top...
  7. D

    Case 580E Backhoe Swing Ram Hookup

    Huge help!!! Thank You, Jim!
  8. D

    Case 580E Backhoe Swing Ram Hookup

    I have a Case 580E backhoe. My backhoe hydraulic swing rams have been leaking, so I took them off the machine to be rebuilt. I was careful to tag each line and where the came from and went to. Unfortunately, the Ram rebuilders tore off all the tags leaving me with two rebuilt rams and four...
  9. D

    Case 580B in West Virginia

    I have an old Case 580B and need a little help. There are two Hydraulic hose "Swivals" bolted onto the dipper of my backhoe...one on the left and one on the right. Hydraulic hoses go into these "swivals" which allow them to adjust as the dipper moves up and down. With the reference being...
  10. D

    Case 580E Backhoe Rear Lug Bolts

    Thank you Jim!
  11. D

    Case 580E Backhoe Rear Lug Bolts

    I have a Case 580E backhoe. I have 17.5l-24 tires on the rear. My driver’s side rear wheel lug bolts continue to work themselves loose to the point where the thread on all eight bolts has deteriorated and all need replacement. The existing lug bolts are fine thread and ~ 1 1/2 inches long...
  12. D

    Is My Engine Ruined?

    I have an old MF 70 with a Perkins A4.318 Diesel engine in it. My water pump failed and in the time it took to replace it, the crankcase oil had a lot of pure water in it, not antifreeze. Machine was uncovered in the rain. I have not turned over the engine yet, but did drop the pan and...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top