Recent content by DSMHONEYYARD

  1. D

    Allis B hydraulics

    Gravity brings it down. The B's hyd are lift only.
  2. D

    Picker part ?

    It looks Farmbuilt to me. What type of tractors are on the farm? Or were? No one else in the local area to ask? What kind of farms was in the area? To me it looks like something that was built for an orchard tractor, to keep the limbs of the trees or shrubs from getting caught on the tractor...
  3. D

    Tractor Seperator

    Well, you could use a bunch of bolts to hold it together.
  4. D

    Tractor Seperator

    You can DIY one like it. All it takes is some angle iron, some flat stock, some all thread, 8 wheels, a few nuts, and a welder. Start with making the stands or use some jack stands or stabilizer jacks. I did some thing like it for splitting my AC-B. I used a couple stabilizer jacks, and made...
  5. D

    Safety Instructions For Paint Hardner Sold on This Side

    Well, from my reading, all of this OSHA and NIOSHA rules and guidelines are for workers who spray for full shifts. I have not found anything yet that talks about someone who spends less than a couple hours once or twice a year spraying paint. Any exposure at the low levels that the hobbyists...
  6. D

    Allis Chalmers B plug wires

    Also, make sure that you have the correct type of plug wires. The must be copper core. The newer type don't work well with a magneto type of Ignition.
  7. D

    Allis Chalmers B, Gemmer steering box

    Well I have everything disabled, and started the welding repair to the front cover. Minimal wear on the bearings and gears. I tried using my bench grinder to make the conical lock piece. It turned out somewhat ok but, I think it would be better turned on a lathe. I will drop by our local maker...
  8. D

    Allis Chalmers B, Gemmer steering box

    Thanks for the link. I do have some manuals, I didn’t have that one.
  9. D

    Allis Chalmers B, Gemmer steering box

    Additional photos
  10. D

    Allis Chalmers B, Gemmer steering box

    I have some questions about my Gemmer steering box for my Allis Chalmers model B. I am attaching all of the pictures I have taken of it. I have taken it apart, but put together for the pictures. 1. Is it worth trying to weld it? The two mounting tabs are broken off, one is cleanly broken it...
  11. D

    John Deere model 1 sickle bar mower

    I have a John Deere model 1 sickle bar mower, that I got from my grandfather. I am looking for manuals and any information on it. I know that it was originally horse drawn, but by the time I got it, the drawbar had been shortened. I have already started replacing warn out cutters and ledger...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top