Recent content by dubuque-man

  1. D

    2155 John Deere temperature gauge

    My 2155 JD temp gauge will show over heating but the tractor is not getting hot. I bought this tractor about 6 years ago and previous owner told me of this. the needle will go from cold to past the red as the tractor warms up. I just ignore it but I am afraid that some day the tractor really...
  2. D

    420W hydraulic pump rebuild help

    I think the O-rings come in a bag of 4. Only 1 is used with the leather ring.
  3. D

    Questions on JD 2155

    Tx Jim, BD, Tech 7, or anyone Please check my post from earlier in the day under 2155 John Deere. I really would appreciate your thoughts on these questions. Thanks, Dubuque-man
  4. D

    2155 John Deere

    Purchased a 2155 last June with 6500 hrs. Last fall I changed the antifreeze. drain, flush and refill with JD Cool-gard II and distilled water. Are you saying that I still may not have enough corrosion protection to protect the liners? I also have other questions. Everything on the tractor...
  5. D

    brown squirrel with white tail

    I have the opsite here, a white bodied squirrel with a brown tail.
  6. D

    420 JD quits in field and will not start for several days

    Another thing to check is rust in the gas tank shutting off the fuel flow at the settling bulb.
  7. D

    jd 1010

    I guess it's time someone had something positive to say about a 1010. My father-in-law bought this 1010 almost new in 1965. It's a 1963 RS gas model. He used it till he retired from farming in the late 1980's and it served him well. I purchased it from another family member in 2010. It looked...
  8. D

    420 hydraulic pump rebuild

    I finally got around to rebuilding my hydraulic pump on the 420. A bad o-ring was causing hydraulic oil to go to the engine crankcase. I replaced the o-ring on the shaft and was re-asembling the pump body. I notice the new rubber rings between the 3 sections were narrower than the originals...
  9. D

    Paris, Kantucky tractor/truck show

    I thought they had a good show and attendance considering the threating weather. I went to see Dubuque John Deeres and there were a couple of nice ones but not really very many. I took a son and grandson and they had a good time. That"s all that matters.
  10. D

    4110 cultivators for a John Deere 420s

    Does the arm on the rockshaft that you are hooking the cable to stick up or down? If it sticks up you have an earlier 420 that was designed for the 4100 cultivators
  11. D

    John Deere MT

    Bill, where do you live?
  12. D

    expo ?

    there were more vendors than usual and many interesting tractors to look at, but the overall tractor count was down. the lawn and garden guys were there in full force with a great number of tractors. I went friday all day and the weather was perfect, but the crowd was sparce. I went to look...
  13. D

    420 S cult.parts diagram

    for a 1956 420s you need 4100 cultivators. these have a lift pipe on each side of the driver. these fit 40s and early 420s. the 4110 cultivators fit 1958 thrui 1960 420s and 430s. they lifted with a cable or a single pipe by the drivers left foot.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top