(800) 853-2651
SHOP NOW

Recent content by Ed Ridgeway CO

Yesterday's Tractor Forums
  1. E

    small chipper

    Chris you might want to save your money and find another way to dispose of the brush I don't think you will be happy with a small chipper they are just too darn slow. I had a DR chipper well built machine would chip a 4 inch log but a 4 inch log to me is firewood.What I wanted to chip was pine...
  2. E

    found in jubilee vain pump!!!!!!!!!

    I found one just like it in my piston pump.Must have been the same mechanic. Ed in CO
  3. E

    Oil filter for jubilee hyd and a rubber boot?

    JMOR What if his back pressure valve were stuck closed? I think George said that his gauge goes up to 2000psi when he lifts his truck and stays there.it should go back down to almost zero when it reaches the desired height shouldn't it? Sounds like something is not allowing the oil to exit the...
  4. E

    IT'S UP IT'S UP IT'S FINALY UP

    And it stayed up all night.My three point lift that is after almost 2 years of trying to fix the hydraulics on my 53 I finaly got it to work.I found so many things wrong that it's a wonder it ever worked. The last thing after rebuilding the lift cylinder was I was getting lots of volume from the...
  5. E

    Tractor grafting questions

    Hello Doug If you get the 53 and have no use for the hydraulic pump I may be interested. I have to be away from the computer for a couple of weeks I'll check back with you when I return. Thanks ED
  6. E

    jubilee hydraulic pump

    Where do I sign up for the 39$ pump.
  7. E

    NAA hydraulic no pressure

    I'm starting to think that maybe it is the pump also,though I don't know why since I did put a rebuild kit in it.When I rebuilt the pump I did find broken springs and other junk in there.Did I also mention that I found a plastic plug like you find in new pumps that was left in the pressure out...
  8. E

    NAA hydraulic no pressure

    I wish I could see oil squirting or running some where but I have a light bulb in the dipstick side and I stick my head in as far as I can get and with a mirror in the pto shift side I cannot see any oil but a small drip coming from the hole in the end plate where the unloader valve is. I have...
  9. E

    NAA hydraulic no pressure

    There is no oil being dumped back into the sump. I can reach my hand in and with a small punch Inserted into the hole in the end plate I can feel the unloading valve move back and forth when I move the position lever up and down.When I move the lever down the unloading valve moves toward the...
  10. E

    NAA hydraulic no pressure

    I connected a hose from my pump and ran it back into the lift to see if the pump was pumping. This is how much oil is being pumped at idle. I put a pressure gauge in place of the hose and ran the engine.The lift will not come up no pressure on the gauge and no oil leaking anywhere inside or...
  11. E

    Springtime in the Rockies

    Yesterday I was raking today I think I'll stay in by the fire.
  12. E

    Jubilee hyd 2?

    Here's a picture of the top plat on my jube.I don't know what you mean about a thin plate.The only other thing is a thick gasket.has NAA476 or 478 hard to tell. Ed
  13. E

    Jubilee hyd 2?

    I didn't find the o rings in the kit either so I didn't replace them. I gotta do some rakeing with 8n then maybe I' ll go up and stare at the jube for a while.Maybe take some pictures of my top plate. Be back later. Ed
  14. E

    Heres the full scoop

    That's not an old standpipe I put that when I first started.Yes I dug the entire hole with that scoop and tractor.It took several years of what I called therapy after work to complete it.I could only work in the bottom during dry season. I built a small dam upstream and a temporary overflow so I...
  15. E

    Jubilee hyd 2?

    I haven't made any more progress on my lift.I don't like to go to the barn unless I have an idea. For what it's worth my cover plate is just like the one in Georges picture.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top