Recent content by Ezze

  1. E

    Case 1175 Battery Box

    I got tired of fighting with the existing battery box so I installed a new one, here are a couple of pics...
  2. E

    Case 1175 Engine Temperature Gauge Isn't Working

    I forgot to thank everyone who commented, this is a great community! Thank you!
  3. E

    Case 1175 Engine Temperature Gauge Isn't Working

    Actually it's not that tight on my tractor now. I used a 5-1/4" hole saw to create access hole, made it easy to access. The trim pieces will cover the hole and since I didn't cut across the channel in the sheet metal it really doesn't compromise the stiffness of the cowl. Pic below. I...
  4. E

    Case 1175 Engine Temperature Gauge Isn't Working

    No, I actually didn't use any type of thread sealer, just snugged it up tight and it didn't leak. I pulled the panel and took the signal wire and the lamp wire loose, leaving only the power wire connected and the gauge still pegs left when I turn on the key . I ohmed the signal wire to make...
  5. E

    Case 1175 Engine Temperature Gauge Isn't Working

    Yep, A66733 bought from Messick's, brand new in a sealed bag.
  6. E

    Case 1175 Engine Temperature Gauge Isn't Working

    Hello everyone, The engine temp gauge wasn't working when I bought the tractor so I pulled the wire off the sender and touched it to ground and it pegged the gauge all the way to the right. I just installed a new sending unit and nothing changed. On closer examination, the gauge is not just...
  7. E

    Hydraulics Question

    Thanks Don. I've been reading up on the 1175 and people seem to have a high opinion of it. This one had 2,777 hours on it and it seems to be in pretty good shape. It starts and runs good but it had been setting in a barn for a while. Engine temp gauge doesn't work, fixing that is my first...
  8. E

    Hydraulics Question

    Thanks very much for the warm welcome! This is actually my first Case but thanks to this forum, I was able to figure that out before anyone saw me floundering trying to use the left set and then the right set, etc. Hoping to learn a lot here...
  9. E

    Hydraulics Question

    Ok, that makes sense. The guy I bought it from said it's been a haying tractor all its life. I guess it won't hurt anything if I just unplug it and coil it up then. Thanks for the reply!
  10. E

    Hydraulics Question

    I just bought a Case 1175 tractor and I have a hose that I have no idea what it's doing. It's looped out of the top right hydraulic port and just makes a loop back to the valve. Anyone ever seen this? Thanks.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top