Recent content by GeorgeAus

  1. G

    Massey MF50D - Electrical Fire

    This part got a bit hot when starting, and I had not realised some brake fluid had leaked onto it. Burnt this and melted a number of wires back to the main cables. Besides referring to the standard electrical diagrams which are a bit hard to follow, any suggestions on what i've cooked here. The...
  2. G

    MF50 industrial Forward / Reverse Issue

    Thanks for your and Jim's responses
  3. G

    MF50 industrial Forward / Reverse Issue

    Thanks Jim, I misunderstood. I had read about the clutch pack possibly being an issue. This query was just a hopeful attempt it could be something else then a major job. If its the clutch pack but still operable with a lot less power, can I still use it without breaking anything else ? Forgot...
  4. G

    MF50 industrial Forward / Reverse Issue

    Ok. Thanks. But if its working Great in Reverse ?
  5. G

    MF50 industrial Forward / Reverse Issue

    Purchased a MF50D backhoe / loader and when driving there is a significant difference in Forward Speed vs Reverse. Lacking power in Forward. I have read it could be a torque converter or clutch issue. Is there any other possilities that doesnt involve a repair major job. Pic of Forward Rev Pedal...
  6. G

    McCormick-Deering Super AWD-6

    Thanks all for the comments. Followed back to tank accessed on the left side near driver position. Was virtually empty.
  7. G

    McCormick-Deering Super AWD-6

    Thanks Jim. I was hoping they could get away with a 850 battery. So if would go close
  8. G

    McCormick-Deering Super AWD-6

    Thanks . I will go an have a look for the tank, I thought there should have been one their. Just on the engine oil fill, I thought the fill would be nearer the filter on these. It threw me that the hydraulic pump was bolted on next to what quite rightly looks like the engine fill. See PIC...
  9. G

    McCormick-Deering Super AWD-6

    Hi. I'm a bit confused. Neighbour has asked for advice with hydraulic issues. I know very little about this old beast. To make sure there is enough oil where do I check. I can see what I think is the fill cap. Is it top up until you can see the level ?
  10. G

    New Holland 450 Sickle Mower

    Sorry . I missed this response. Thanks. I ended up buying the 450 in working order (with a lot of work). Regarding the other one. The guy chucked in a 453 missing the wobble box arms that were apparently used to keep the 450 going. So i guess these fit. Still chasing parts to have a spare just...
  11. G

    New Holland 450 Sickle Mower

    These are pics he sent. It appears the one marked 453 has the plastic PTO cover and the 450 is the steel. Sorry that there are no pics from the other side.
  12. G

    New Holland 450 Sickle Mower

    Hi Again Guys. I have a guy wanting to sell me what is an A450 here, which I think is a match for mine (mine has no serial but 450 painted on it) . Hes also got an A453 as well. Would it potentially be the same improvement in upgrading the wobble assembly from this one ?. The Bar's on both look...
  13. G

    New Holland 450 Sickle Mower

    Thanks this is very helpful. I am still stuck with trying to source one here in Australia for parts, but knowing about the differences in the 450 vs 451 will be handy.
  14. G

    New Holland 450 Sickle Mower

    Thanks. So the parts are the same but the wobble assembly of the 451 was made better ?
  15. G

    New Holland 450 Sickle Mower

    Hi All . I am trying to restore an old 450 mower and have managed to break the Crank Connecting Rod, Part No 63802 I think. Buying new in Australia is cost prohibative and I am trying to buy another mower to source parts from. Besides the 455 what other models might use the same part ? . Over...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top