Recent content by georgeR

  1. G

    jd straight 310 backhoe fuel issues

    well I didn't have a chance to reply but my backhoe is doing fine, I went to tear into it and I actually had to backtrack the fuel lines to the tank didn't even know where that petcock was, I don't believe I ever messed with it and I had this backhoe for a few years now, well I go to shut it off...
  2. G

    jd straight 310 backhoe fuel issues

    that is my plan. at firs I freaked out because this happened at about the same time the rad filler neck cracked at the seam, not even sure how long that had been going on for I believe I came across it by chance when I was checking fluids, I happened to be under the gun at the time so I put a...
  3. G

    jd straight 310 backhoe fuel issues

    for some odd reason I can not see my original post in the modern view, so here it is below I had a bit of a scare with my old machine last fall the rad sprung a leak and by the time I noticed it, it had started running rough, for the most part I thought I cooked it, so I parked it for the...
  4. G

    jd straight 310 backhoe fuel issues

    for some odd reason I can not see my original post in the modern view, so here it is below I had a bit of a scare with my old machine last fall the rad sprung a leak and by the time I noticed it, it had started running rough, for the most part I thought I cooked it, so I parked it for the...
  5. G

    jd straight 310 backhoe fuel issues

    I read about that, and the symptoms are very similar to the ones described, I also came across a thread that mentioned a leak on the suction side of the lift pump will do the same thing, I get air in the fuel filter, so I need to deal with that first, I am pretty sure that is not right. but...
  6. G

    jd straight 310 backhoe fuel issues

    I had a bit of a scare with my old machine last fall the rad sprung a leak and by the time I noticed it, it had started running rough, for the most part I thought I cooked it, so I parked it for the winter and this spring it started right up but it has issues, I have full power as soon as it...
  7. G

    jd straight 310 backhoe fuel issues

    I had a bit of a scare with my old machine last fall the rad sprung a leak and by the time I noticed it, it had started running rough, for the most part I thought I cooked it, so I parked it for the winter and this spring it started right up but it has issues, I have full power as soon as it...
  8. G

    310 backhoe powersteering

    for those of you that are more familiar with these machines than I am, I have a straight 310 backhoe, the powersteering never really worked, and there is evidence somebody before me was in there , left some things not put back together the other day the side cover on the clutch housing...
  9. G

    310 powersteering

    t 21527, if you are familiar with the deere site this is off the catalog I downloaded, my question is should there be that much pressure and fluid behind that plate? if any at all I have a feeling a lot of it is coming from the defective powersteering above, that is my concern it never really...
  10. G

    310 powersteering

    for those of you that are more familiar with these machines than I am, I have a straight 310 backhoe, the powersteering never really worked, and there is evidence somebody before me was in there , left some things not put back together the other day the side cover on the clutch housing...
  11. G

    To-20 Need a radiator shroud!

    I need one too
  12. G

    Ferguson T-20 clutch problems

    that sounds odd to me, oil making the clutch stick, I split mine today, and my trans seal has been leaking the back side of the clutch was soaked, yet mine has been working pretty decent, to each is their own. a sticky clutch as the OP describes it, I would guess the pressure plate does not...
  13. G

    trans gasket

    I made one for the hyd pump plate, just because I was in a hurry and didn't feel like ordering one wait a week and pay s&h. your local parts store sells gasket material in various thicknesses, a utility knife and a hole punch takes a few minutes, and you got some left over material for...
  14. G

    Ferguson T-20 clutch problems

    the trick here is not to bite too much, from your other post sounds like that tractor sat outside for a while, with the clutch, you got to split it to have a look at, you could take that bottom dust cover off, or on the bell housing on the bottom there is a drain hole , should have a cotter...
  15. G

    Ferguson TO-20 Hyd. lift control very hard to move

    it shouldn't be as hard, I rebuilt my pump last year, cant remember but there is a fork inside that operates the valve, that fork I believe its directly bolted to the lever there is also a spring in there, holding it, you should open it up not much to it, however to have a better look at it all...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top