Recent content by Helmsman

  1. H

    631 throttle help

    Well, after disassembly and reassembly of the throttle linkage under the fuel tank of my 631 in preparation of paint, I've managed to screw something up. Not that I'm too surprised, even though I was careful to reinstall everything the way it came apart, or so I thought. Here's what is...
  2. H

    188d fuel filter

    Thanks, I will message you Jean.
  3. H

    188d fuel filter

    With the same engine, it's strange that they wouldn't have the same filter. We're they updated through the years, as in a 430, 530 and 630 of the same model year would have the same filter?
  4. H

    188d fuel filter

    I will be going to the salvage yard on Monday to hopefully find a fuel filter assembly. Thanks for all the helpful replies. I wonder how long the poor girl has been running this way. Hopefully not long...
  5. H

    30 series gauge clusters

    Ok, so the oil pressure ranges are different between gas and diesel then. I have a potential donor tractor with a good gauge, just wasn't sure if it would work. Thanks John
  6. H

    188d fuel filter

    New to me 631, engine has yellow paint peeking out from under the orange so it's likely not original. Whoever did the work decided to simplify the fuel filter setup. Runs like a top, but I'm guessing the water separation will be... subpar. My question is, should I try to find an original fuel...
  7. H

    30 series gauge clusters

    Can a stewart-warner gauge cluster from a gas tractor be used on a diesel that has the autolite cluster? Parts book shows them having different part numbers, but it's not much help beyond that.
  8. H

    Wtb 188 diesel engine

    Thanks, I will give him a call. Amazing the old girl was running as good as it was, considering what the engine looks like now that I've torn it apart.
  9. H

    Wtb 188 diesel engine

    I am restoring my 630 and unfortunately the engine is beyond saving. Looking for a complete diesel engine, prefer good running but anything will be considered. Closer to E iowa the better. This post was edited by Helmsman on 06/15/2022 at 07:53 am.
  10. H

    Ferguson 14a plow with harrow

    They definately caught my eye, there were several plows on the auction and i bought this one specifically for the harrows. A little TLC and a few parts and hopefully itll be back in action.
  11. H

    Ferguson 14a plow with harrow

    Just got a 14a 2 bottom plow for my T0-30 home, and it has a harrow mounted behind each moldboard. Ive never seen one like it before, is it a Ferguson harrow or something aftermarket? Any idea on the age of the plow? Serial number is 27911. Tag says Ferguson-Sherman.
  12. H

    641 overhaul parts

    Thanks for the advice, I called John and he really knows his stuff. I had no idea parts for the 188 gas were that hard to come by.
  13. H

    641 overhaul parts

    I'm in the process of restoring my 641, and I'm going to rebuild the engine. Who sells a good quality overhaul kit for these gas motors? I just need standard size bearings, and I'm gonna put new sleeves, rings, wrist pins, etc. Google shows me lots of kits for the diesel. Not having much luck...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top