(800) 853-2651
SHOP NOW

Recent content by Highwayman

Yesterday's Tractor Forums
  1. H

    674 international. No Hydralics.

    It’s easy to activate the remote lever with your pant leg climbing on Make sure that not causing your bogging down issue. P
  2. H

    “the tract.i.or vet” welcome back!

    Glad to see he’s back and still kicking! He makes the board a must check. I had been going long stretches without looking in. Will be looking in a little more often now. Welcome back!! 👍👍
  3. H

    450 head gasket?

    Best source for a valve grind head gasket set for a 450? The ones available here ok? Don’t want to be doing it again. 282s have me fussy as it’s about impossible to get a good one for them anymore. Interesting they used 16 head bolts on this and just 14 on the diesel with 2 extra cylinders...
  4. H

    M&W piston rings?

    It has a 450 gas head and 6” stroker. It is just an M block I had bored out 30 years ago to accept the super sleeves. I don’t think I can safely bore it anymore without hard blocking it. I should’ve pulled the sleeves and put 4.25 pistons in it then while they still could be found.
  5. H

    M&W piston rings?

    I should’ve elaborated a little further. I was thinking about getting a propane head for it and decided to do a compression test and found 1 cylinder 50 lbs short it’s my pulling toy. Comp test was 200,150,190,190. No noticeable skip or anything though.
  6. H

    M&W piston rings?

    Anyone know where to find a set for 4 1/8” Pistons? Are they the same as firecrater or another aftermarket set. Got a weak cylinder and I guess it’s time after 25 years. Thanks
  7. H

    Decent muffler?

    Would like a round body like was on it originally with a baffled body so it’s QUIET! The type I want used to be available most anywhere. I detest the Stanley ones sold by tsc. I’m not sure the ones sold here are any different.
  8. H

    Decent muffler?

    Need a new muffler for my 706 d with the 282. Want something comparable to oem. No noisy Stanley junk please! Thanks!
  9. H

    560D

    Salvage yard
  10. H

    560 hydraulic leak

    Looked it up on Messicks website and the part number is 370964R91 discontinued Oh boy…..
  11. H

    560 hydraulic leak

    What I believe is the main pressure hose with the odd fitting on one end and oring fitting sprung a leak. Where to get one ?
  12. H

    can't prime 684 IH

    The crossover line is probably plugged. When you look in the fill port it appears to have fuel when in reality it’s empty on the other side you can’t see. Easiest solution is to just keep fuel in it.
  13. H

    190XT series 3

    Have a buddy with a 190xt that don’t run. We determined today the injection pump isn’t turning. Probably means pump is junk? No core value? It hasn’t been run much since his dad died a few years ago. Doesn’t have any sentimental value Trying to decide what to do with it. Sell for salvage and...
  14. H

    Attachment for bucket on 584

    I did exactly what you are thinking about. Got a quick I did exactly this and operate the grapple with the rear remote. My loader has its own valve I bought a skid steer mount off eBay with no loader brackets. I had to cut the ones off my old bucket and welded them to the mount. The old...
  15. H

    Trucking tires

    I was all set to rent a trailer as suggested above but now got me thinking. That just might work! They’re mounted on 9 bolt rims and centers But still should
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top