Recent content by Iliketofarm

  1. I

    Wooden disk bearings

    Thank you for all the information on the bearings. I will do some more checking down these avenues and see what I can find. Thanks Aaron
  2. I

    Wooden disk bearings

    I am looking for some wooden bearings for a cub disk. I am not sure of the model (no tags), looks similar to a 23A but is single gang. Also the lube points are not zerks but a screw cap that forces grease down the tube. The axle shaft inside the bearing block is smooth and enclosed in two...
  3. I

    Transmission Fluid for Versatile 750

    Thanks for the input. I serviced the transmission (drain and filter) and replaced with 50 wt. transmission fluid. Everything works a it's designed to. Thanks Again. Aaron
  4. I

    Transmission Fluid for Versatile 750

    Good Morning, I would like to find the correct fluid for a 76 Versatile 750. I've added tractor hydraulic but my transmission pressure is dropping. Anyone know? Thanks Aaron
  5. I

    Using an IH model 39 Tumble Plow

    Thanks for the information. I can see now what the wheel stops are for, in furrow and on land, and the swinging tongue to reduce the draft makes sense. Mine appears to have two 14" bottoms and does not pull quite as hard. I am planning to use a JD G for the puller, so don't know if it will do...
  6. I

    Using an IH model 39 Tumble Plow

    I have some questions on the use of this plow. Is it an in furrow plow? There are two stops on either side to hold the wheel at a certain height. When I pull the rope sometimes it drops all the way and often it stops at the first position. Also the tongue looks as though it can be moved from...
  7. I

    Moldboard needed

    Thanks Earl, the number is 515711R1. Aaron
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top