Recent content by Iniles

  1. I

    Oliver 1365

    I am considering picking up a 2WD Oliver 1365 to rebuild a 4WD 1365. I am wondering if the Transmition and engine are the same minute the transfer case and front axle. It's harder to find the 4wd units. Anyone that can let me know if they are mostly the same or not would be greatful.
  2. I

    Oliver 1365 front axles

    Thanks for everything you have tried. Is the service manual better than the shop manual?
  3. I

    Oliver 1365 Front Axle

    Yes. I was trying to get the axle out of the housing. I am at the knuckle or where the 2 u joints are. I removed the retaining screw on the back of the axle housing. I did not want to force anything and the shop manual does not show the best.
  4. I

    Oliver 1365 front axles

    White Tractors 1355 & 1365 Oliver, G450MM 2-60 White 2-50 White Shop manual I tried to send a photo but it would not take it.
  5. I

    Oliver 1365 front axles

    That would be very nice to have. I wonder if it's different from the one I have.
  6. I

    Oliver 1365 front axles

    That is why I stopped were I did. It kept taking me deeper and deeper. I stopped at the u joints. The knuckle was filled with all sorts of stuff. But everything looks tight. I am putting it away for the winter and will continue next summer. Hoping to get her back to her glory. I am getting a...
  7. I

    Oliver 1365 front axles

    I went all the way to the u joints. The end of the axle got a little worn because the bushing was cooked. I could not get the axle out so I split the u joint and had it turned and a bushing made. Got the u joint back together and it's like new back to the u joints. I need to do the other side...
  8. I

    Oliver 1365 front axles

    Yes looked at the brake down. It's a little confusing. Is there a clip inside the housing. This is on a 1365.
  9. I

    Fluid/ Oils

    What is the best fluid for the front planetarys? Is gear oil better than hydraulic oil?
  10. I

    Oliver 1365 front axles

    Looking for information on how to get the front axle out. I am at the u joints and have removed the set sçrew from the axle housing. Am I missing something?
  11. I

    Oliver 1365 with 4x4

    Can anyone let me know how to remove the front axle of 1365?
  12. I

    Oliver 1365 Front Axle

    Looking for information. On how to remove the front axel. I think you remove the set screw on the back side of the housing by the knuckle. I did this but can't get the axle to come out. Any advice would be great.
  13. I

    Oliver 1365 with 4x4

    Russell, I have not but I am going to look in to them. I have been rebuilding the planetarys in the front end boy did I open up a can of warms. The good news is it's going to be like new all the way to the axle.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top