Recent content by Iowegian

  1. T

    When is it time to toss in the towel?

    My kid has his grandpas WD. She had a hard life, then was left in the woods for about 10 years until I rescued it back in 1999. I didn't use it too hard, moved some snow and brush hogged a bit. I hauled it down to him a couple of years ago and told him she had been rode hard and put up wet so to...
  2. C

    Photos of UDLXs in action

    This is kind of a long shot. I’m putting together (hopefully) a historical farm display in 1/64, and would like to include an MM UDLX in some sort of custom-hire application. Problem is, I’ve not found really any good references or pictures as to what these tractors would have been used for or...
  3. N

    John Deere Unstyled A Belly/Brush Hog?

    I purchased a new property that has plenty of grass pastures that could compete with Kentucky. And then there are pastures that could compete with the jungles of South America. I have an Unstyled A and was wondering if there is anything available that could work for that and my situation. And...
  4. A

    RGMartin

    Need to find steering cylinder rebuild kit for an early 990 with power assist steering. Any suggestions on where to find a kit? TIA
  5. P

    A/C motor

    Building a 4.25 x 6 Allis motor , will a 12 volt starter turn it over to start?
  6. D

    Serial Number Plate

    The serial number plate on my Massey-Harris MH50 is readable, but two of the four corners are broken off. Now, only two screws hold the plate. Is there a replacement plate available that I could transfer my serial number to or would the tractor be more valuable with the original, damaged plate?
  7. C

    Snap Coupler Bale Spear

    Anybody ever seen one?..made one?? Three point conversions are expensive so I"d like to find/build one for the sc. Any ideas?? Thanks
  8. R

    630 deisel wonder

    I have pulled my 630 from the pines and have been working on getting it running. It came from a farm that did not know what maintence was. Well short story short have the engine completely taken apart. All exhaust and one intake push rods are bent after hitting hard on the pistons, but nothing...
  9. I

    A John Deere Year and trans

    I should have mentioned that there is no quadrant and the numbers and lettes are as you describe for the four speed with this being said if it is in the early 40s whats with the serial number being 557681 although it could have been switched (serial number) why would someone bother Seems like...
  10. I

    A John Deere Year and trans

    I recently bought an A with s/n557681 the chart I checked said it is a 1945 Slant Dash but it has a 2 stick 4 speed trans one stick is Labeled R and 1-2 3-4 the other has 1-3 2-4 it also has the angle iron frame the serial number is very easy to read and have checked it several times any ideas...
  11. I

    Year and Trans A

    I recently purchases a A with a serial # of 557681 I checked the s/n chart it said it is a 1945 but this one has a 2 stick 4speed trans one stick has R 1-2 3-4 and the other has 1-3 2-4 it also has the angle iron Frame, Any ideas would be of great help
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top