Recent content by Jay Bama

  1. J

    Replaceing Fan Belt

    My 8N front mount has been changed to a 12 volt system with a 1 wire chevy alternator.I loosened the bolt on the top slider bracket pushed the alternator inward and this didn"t give me enough clearance.So I pulled the whole alt. off and had no problem with the belt in the pulley putting the main...
  2. J

    No Spark on 9n

    I'm sorry.I have just heard alot of complaining over the years about points systems.Not just on these tractors but everything that has points.I was just wanting to suggest.Sorry. Jay
  3. J

    No Spark on 9n

    Is this a side mount or a front mount dist? Jay
  4. J

    No Spark on 9n

    If you plan on keeping your 9N long term.I bought a Petronix kit # 1247XT for front mount distributor.I don't know what you have and you may want to be sure your 9N is worth spending this $$$ on.I Bought mine off e-bay cheaper than I could find it anywhere else.I looked too.It's worth it because...
  5. J

    Ford 8n with 9n motor

    This is what I have and was this way when I bought it.An 8N with a 9N engine.I was told they change out without a problem, engine that is.The Sherman hi/lo transmission I don"t know about.I do not have one so I can not say.The engine swap, I can only say it is possible due to mine being this...
  6. J

    Love it !!!

    U know it. Get er done!!! LOL Jay
  7. J

    Love it !!!

    You just got to love it when your in the field and it's not your field.LOL (Doing a favor) And you hit a stob...Front tire has a hole in the side and tube is busted.Bright side I'm big enough to lift the tire off the ground,have friend place a sawed off landscaping tember under axle.Remove the...
  8. J

    8N misfire under load...

    Hey those new ones are not all they are cracked up to be.I work on them for a living.They are not as simple and waaaaay more expensive on parts.You can figure it out.Think about how long these ole things have been goin.If you can get it to start that's half your battle won.Hang in there. Jay
  9. J

    Engine prices

    Mid South Tractor Salvage 256-353-5661 I have been going to this place since I was a kid with my dad. Jay
  10. J

    Engine prices

    Where are u again?I know a little slice of HEAVEN close to where I live.North Alabama...There web site doesn"t list anything the way I wish they did.It"s only about fifteen minutes from my house.It is a major grave yard for N"s and even whole tractors.Not sure about those prices, but i"m sure...
  11. J

    My 9N is completed

    Looks great!You done A1++++ job.looks like one off the sales brochure.That's about the best compliment I can give.I got a question for you too.What is the flat bar with a hole in each end?It's leaning against the right rear axle in one of your before pics.Reason I ask I got one just like it with...
  12. J

    Napa fuel screen part numbers?

    Thanks! I appreciate the help! Jay
  13. J

    Napa fuel screen part numbers?

    Hey, I need the part numbers for the fuel sediment bowl screen and rubber seal.Please? Someone had posted them both not to long ago.Bein lazy and not wanting to back track.My bowl started leaking pretty bad this afternoon.Appreciate the help! Jay
  14. J

    9N starts, runs, stops, starts, runs, etc.

    I agree Dell,just went through it myself.Look at the top of your sediment bowl for an air pocket while engine is running and fuel valve opened.Whether you see it or not that is a sure sign.I removed the glass and the screen was full of small rust particles.Under a load it will require a strong...
  15. J

    Tractor followed me 1/3 of the way home

    I'd like to see some pics of your find if you got some.This sounds like something my wife would catch me doing.Good luck and safe trip! Jay
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top