-
J
AICO Remote valve
Hello, just bought a used AICO valve for my 650. Hoping to use it for up down and power angle snow plow. It only had one handle on it that operated the top 2 ports. After cleaning it up, i realized its a two spool and is missing the second handle. This is an odd design, a very tall valve body... -
J
hyd. help?
My ford 650 seems to lose hyd. prime in the 3 point in colder temps. The lift is strong and works good all summer, then every fall/winter it wont raise without running the tractor for a while and loosening the allen plug on front of pump. Some air will spit and sputter out and eventually it will... -
J
Case 244 info/opinions?
Thank you, and yes i have notice there arent many around, and didnt know why. Most little disels are in high demand, and it would be nice to get a clean one close to home. Sounds like it might be easier to get parts for my 600 that is 30 years older. 6500$ might be a little high.- JCD
- Post #1
- Forum: Tractor & Farm Talk
-
J
Case 244 info/opinions?
Hello, I was looking for information on Case IH 244. This is my neighbors tractor, beautiful shape, stored inside its whole life 1800 hrs. I believe it is a model year "85, and has IH 5ft front mount snowblower with full winter cab/sheilds, and a 5 ft finish mower. Tractor is 4wd, not sure about...- JCD
- Thread
- Replies: 2
- Forum: Tractor & Farm Talk
-
J
Stanley wide cut mower/brushhog anyone?
I was wondering if anyone knows anything about the batwing style 100 inch Stanley pull type mower thats in northern tool catalog? it claims to be finish mower and brush cutter in one as 52 inch single, or with wings down finish mow 100 inches. I thought it might be a versatile tool instead of...- JCD
- Thread
- Replies: 7
- Forum: Tractor & Farm Talk
-
J
leyland tractors anyone?
Hello i was wondering if anyone had any experience with Leyland tractors? There is a Leyland 252 for sale in my area, NE Ohio. I believe it is a 1972, owner says 1600 hrs. diesel, with remotes. he says everything works, and seems in good shape. Would this be a good replacement for my ford 600...- JCD
- Thread
- Replies: 6
- Forum: Tractor & Farm Talk
-
J
hyd. prime issues
Hello, i was hoping someone could help me figure out the best place to start for lost hydraulic prime in my 56 ford 600.The lift is strong and smooth in the warm weather, but as soon as it gets cold, and especially if tractor sits, i have to let it run 10-20 min while loosening the allen plug in... -
J
rear snowblower
thanks for the replies. Blower is located about 30 miles east of cleveland oh.- JCD
- Post #1
- Forum: Tractor & Farm Talk
-
J
rear snowblower
Hi guys, was wondering if any one had opinions on puting a john deere 676 3 point snowblower on my ford 650. The blower is 6.5 feet wide, i think, and is apparently in good condition. Seller asking 500 dollars.My 650 has a 172 ci engine, maybe 45 horse. my concern is the non live pto, would this...- JCD
- Thread
- Replies: 10
- Forum: Tractor & Farm Talk
-
J
Woodsplitter on Ford 600
I dont know that you would need a reservoir, my wagner frame IS the reservoir, and if im not mistaken, loader front pumps are in the 10 to 13 GPM range, might work ok. -
J
Woodsplitter on Ford 600
I dont know that you would need a reservoir, my wagner frame IS the reservoir, and if im not mistaken, loader front pumps are in the 10 to 13 GPM range, might work ok. -
J
ford sputtering solution
I have a question for those more knowledgeable than I. Could a weak point somewhere in the primary/ secondary electrical system cause missing/sputtering under load. I have written extensively on this site about my 600 that runs on 6v but has to start on 12v. I have yet to diagnose the cause and... -
J
Belarus any good?
I was curious to get some opinions on Belarus tractors. There is one for sale near me in NE ohio, I believe it is a 1994 model 310. Somewhere around 36 horse maybe, but big stout chassis, heavy looking 4WD. Kind of strange 2 cyl. air cooled diesel. Tractor has 287 original hours, and the price...- JCD
- Thread
- Replies: 6
- Forum: Tractor & Farm Talk
-
J
trade 4000 ind for 600?
I have been wanting live pto and a loader for a while, and have come across a unique opportunity. I found a guy looking to sell his 64 ford 4000 industrial. 4 cyl. diesel, SOS, PS, loader. Needs a few minor things, he says engine and tranny work great. $2800 dollars. He happens to be looking... -
J
frustrating ford part 2
thank you for the ideas. I will do a little more diagnostic work and see is i missed something. I'll check back in. BTW 12v spins it much faster. my 6v batt. is going on 4 years old. comp. check was done with WOT, plugs out, 6v.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy