Recent content by JIM603

  1. J

    part numbers

    Now that you have showed that i was wrough. Yes it is a two cyl. not a 3cyl. So my question is the same. Does someone have the part numbers i need. Thanks.
  2. J

    part numbers

    I have a 1949 jd mc 3 cyl gas 6volt dozer need part numbers for points, condenser, cap , rotor, spark plugs. Tiered of the junk at tc. if you have napa or something better please help. thanks.
  3. J

    Points Needed

    sorry had a brain fart. the info i got sure will help thanks
  4. J

    Points Needed

    Posted on here last week got so good advise. Now i need to know ware to get good quality points and condenser. Also need rotor and cap tiered of the tsc sh-t doesn"t last. If you can help thanks. Also is there a dust cover under the rotor, mine does"t have one. Need to know.
  5. J

    RUNNING BUT NOT WELL

    No Bruce did not replace the points but did try to set the timing, not sure i got it right. When by my I&T book to set the timing and thats how i got her started. But like i said she backfires throw the carb. Its this timing or points i would guess to say timing. Also found today that my cap...
  6. J

    Electronic Ignition thoughts

    Here a thought, if my timimg is right and my points are off the mark,then if i install a Electronic Ignition kit in will my problem go away.
  7. J

    RUNNING BUT NOT WELL

    First thing first thanks to all with the posting from 7/11. Still no spark got her going today, now my problem is this. She backfires threw the carb when pulling a hill no attachments just tractor.and now the starter ingages when it feels like it key turned off and tractor running or not.I...
  8. J

    STILL NO SPARK

    Here a thought, if my timimg is right and my points are off the mark,then if i install a Electronic Ignition kit in will my problem go away.
  9. J

    STILL NO SPARK

    Thanks guys will try as you suggested, will let you know how it goes, sorry Bruce for the cap lock. Bad habit i guess.
  10. J

    STILL NO SPARK

    NEED HELP ! HAVE A 1950 8N SIDE MOUNT DISTRIBUTOR. 6 VOLT POS. GROUND. WENT BY MY I.T. BOOK ON TIMING THE MOTOR. AND STILL NO SPARK. I HAVE CONSTENT POWER TO THE DISTRIBUTOR SIDE OF THE COIL. IT BLINKS BUT DOESN"T GO OUT. IS MY TIMING OFF OR ARE THE POINTS NOT SET RIGHT. PLEASE ADVISE. THANKS.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top