Recent content by johndeeregreg40

  1. J

    1020 Hydraulic System

    My buddy went to look at a Deere 1020 today with a bucket loader and noticed the 3 point hitch was leaking from the pump. Is the loader also operated from the 3 point pump or are there 2 separate pumps. If there is only one is it a big deal to rebuild or replace? Thanks! Greg
  2. J

    Hooking up horse plow to tractor

    I care across 2 old horse drawn plows which are walking behinds and I was wondering if there was any way I could rig something up to my 3-pt. Any suggestions would be appreciated! Thanks! Greg L.
  3. J

    John Deere 40 throttle linkage spring

    I meant that the lever should not simply flop down as if it was full throttle, it should stay in any position. Sorry if I was unclear about the problem! This only happens when the tractor is not running as well. When it's running I have no problems with the throttle. Thank you for the part...
  4. J

    Going to 8 volt Battery for M

    Not sure how similar the charging systems are between the M and 40 however I just recently converted my 40 to 12V and I would highly recommend!
  5. J

    John Deere 40 throttle linkage spring

    The spring connecting the throttle/ governor linkage is worn out and therefore the throttle control lever moves loosely before start up. There should be tension on that lever at all times which is not the case with mine. I haven't been able to find a matching spring in any hardware or tractor...
  6. J

    Looking for new tires

    In the market for some new tires (11.2x24) rear, (6x16) front, for my John Deere 40 and I am trying to find a cheap tire.If anybody knows of a good place I can get some let me know! Thanks!
  7. J

    New Tires for JD 40

    Would I need different rims if I go to 5x15?s I have 6x16?s now
  8. J

    Got the MT running

    Sounds great! I have a 40 and it idles just as high is that how it should be or a little lower?
  9. J

    New Tires for JD 40

    I am looking at getting some new tires for my 40 with 11.2x24?s on the back however, I?m not sure if my front tires are 5x15 or 6x16. It?s a standard model so no tricycle and I?m assuming it would be the 6x16. Please let me know if I?m correct and some recommended tire brands!
  10. J

    How to prevent mice

    I?ve been having some mice getting into my tractor behind the dash and radiator and I was wondering how you guys prevent them from getting in there? I?m not really looking to use moth balls but if they work I?ll probably try them out!
  11. J

    How to check 12V charging system

    Just bought some new terminal connectors so hopefully that does the trick! Thanks to all who replied!
  12. J

    How to check 12V charging system

    The alternator I ordered online from advance auto so I?m assuming it?s good? And nothing new was installed except for a new coil. I have checked the voltage while it was running and it did read 14v. Thanks to the quick responses!
  13. J

    How to check 12V charging system

    I have a JD 40 I recently converted to 12V and after about 2 months the battery goes dead. This has happened twice and I?m not sure if the charging system is even working. When the tractor is running and I take one of the terminal wires off the battery the tractor shuts down. Should it stay...
  14. J

    Rear weight mounts

    Nice setup! I?ll see if I can use that design on my wheelie bars! Thanks!
  15. J

    Rear weight mounts

    I have a ?53 John Deere 40 Standard that I?m looking to pull with. I made up some wheelie bars but not sure how to mount weights. How do you guys put weights on the rear of your tractor? Thanks! Greg
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top