Recent content by JS13

  1. J

    TO20 fouling plugs

    Thanks ,will try the ATF in the plug holes for a few days and as far as the smoke goes , I think its about the same when under a load or at idle,also wanted to mention ,took a compression test on the cylinders, a few days before I started this, wrote every thing down,just forgot where I put it (...
  2. J

    TO20 fouling plugs

    Ok,will try and give you all as much information as I possibly can, as I mentioned before I had drained the oil (which it needed, a little over due,) also drained the old anti-freeze, so now will get oil and a new filter and new anti-freeze and will do the checking and testing that you all...
  3. J

    TO20 fouling plugs

    Thanks for the reply,I guess I should explain a little farther, first off I am not in any way a mechanic,I try to keep up on most of the problems on my tractor but things like this is almost beyond my ability,anyway my neighbor said I most likely had bad rings so I drained all the fluids and...
  4. J

    TO20 fouling plugs

    My TO 20 has been fouling plugs for some time now, I,m sure it must need some type of overhaul,but at the time being just can,t afford to much of a major overhaul,I can run it for several days and than notice oil weeping from the last two plugs back close to the batteries,and naturally getting...
  5. J

    Not sure how to do this

    Really want to thank every one for there input on this,will give it a try later today, my valves are definately the mushroom style, I tries to pull the valve guides down but to no avail,one other question,is there no way to drive them down from the top.
  6. J

    Not sure how to do this

    Now I know this is most likely a silly question.butttt, I would rather start out with good information and do it right the first time around, I have a broken exhaust valve in my 2N ford, and the valve guide is also broken,how do I remove the valve guide, looks like it must come out before I can...
  7. J

    2N trans goes clickert y click

    A short time ago I purchased a 2N ,and it needed a little work here and there,but it starts and runs ok, but the other day I took it out for a little ride,took it up above the house a small incline ,well when I started back down I heard this clicking sound from the trans,sounds a little like if...
  8. J

    Belarus Oil Filter

    A great big thanks to each and every one of you out there that gave pointers,suggestions and your personnel experience involving the Belarus Oil filter, I was getting a little concerned about maybe having caused a real problem but now I,m feeling a little better knowing that I have this...
  9. J

    Belarus Oil Filter

    Yep,guess I got in a hurry taking this filter off before I checked a little farther, any way ,I did take it completely apart,cleaned it and put back together ,thats when I found out about putting it back correctly, will take it back off and look for marks just as soon as I get a little extra...
  10. J

    Belarus Oil Filter

    Well,here I go again,I purchased a Belarus 250 AS a short while back,and thought I was doing a good thing when I started replacing filters,well one thing I didn,t know at the time was I was supposed to mark the oil filter in some way before I took it off , needless to say I did not do this, so...
  11. J

    Belarus Oil Filter

    Well,here I go again,I purchased a Belarus 250 AS a short while back,and thought I was doing a good thing when I started replacing filters,well one thing I didn,t know at the time was I was supposed to mark the oil filter in some way before I took it off , needless to say I did not do this, so...
  12. J

    Belarus and torque ,now what.,help.

    Thanks oj,really appreciate the inf,now I can hopefully complete this job .was hoping there was a coversion in my manual but not to be,thanks again.
  13. J

    Belarus and torque ,now what.,help.

    Ok.got my self into a little bit of a fix, bought a Belarus 250 AS, motor locked up,ok took care of that problem,now i,m putting the head back on ,but the repair manual I have tells me to torque the head bolts to ( kgf.m 11-13 ),but how do I convert this to English ft lbs,really would...
  14. J

    Belarus Batteries

    I really appreciate the quick response from every one, I bought this tractor just a short time ago for a winter project and not knowing any thing about this tractor I might need some help, I,m going to include an e-mail address hoping I can hear from you guys , that is if you don,t mind me...
  15. J

    Belarus Batteries

    I recently just purchased a Belarus model 250 AS.2 cyl diesel,my question is why does it have 2-6volt batteries,would one 12 volt not do the job on this tractor ?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top