Recent content by Karman

  1. N

    Half Century show

    Anyone on here going to the halfcentury of progress show in August? I got a bunch from NC that is ready to go.
  2. K

    TO35 oil leak

    Started leaking quite a bit of oil from weep hole under where the clutch is. Assuming this is from the rear engine seal. Can this be repaired by dropping the pan to access the seal or? Thanks
  3. K

    wisconsin vg4d help

    Thanks, engine turns over, there is no spark at all & will remove mag. & have it fixed.
  4. K

    wisconsin vg4d help

    Hi, we have aquired a vg4d, appears to have been setting a good while & the carb was stored out of the weather. Last owner says needs magneto attention. I am not a real experienced mech. but I know with some help will be able to get this machine running. Where should I begin? Thanks! BTW egine...
  5. K

    oil amount for TO35

    6qt if you change the filter 5qt if you dont change filter & straight 30wt oil
  6. K

    Seat for my TO35

    Obviously the '55's are superior. Ours has a contraption with adjustable jointed levers, a coil spring & shock. There are notches in the seat frame in which the 'levers' can be changed. The notches are worn & it is not 'springy butt seat has cushions & is comfortable except it tilts forward &...
  7. K

    TO-35 Idling too fast

    Thanks, I am sure it require additional adjustment & will go over everything again until it begins to behave like a proper Ferguson should.
  8. K

    TO-35 FEL on Ebay

    to35FEL ebay to35 fel
  9. K

    TO-35 FEL on Ebay

    I have never done a link, How do you do it?
  10. K

    TO-35 FEL on Ebay

    if anyones interested
  11. K

    TO-35 Idling too fast

    O.K. I'm obviously NOT good with #s so you have to realize when I say its Idling at 6,000rpms I really mean 600rps now that thats clear I do have the manual & did adjust all the whatever parts on the throttle/gov thing & did cause it 'accidentally' to idle about 550rpms somewhat improved...
  12. K

    TO-35 Idling too fast

    Carb was, purportedly, rebuilt & I have not been able to idle engine down below about 6-7,000rpm On closer examination the fuel adjust screw was missing tension spring. I found a spring & when I took out screw found that tip of this pointy screw is bent, a little. Would that require replacement...
  13. K

    paint for 1955 MF 35

    I think you may find the paint codes at the Ferguson Enthusiasts of North America website
  14. K

    Donnie Milne...where r. u. ? Anyone know?

    Hi, lost track of D.M. I used to get some Pony Tractor parts from him in Nova Scotia, & I thought I met him from this site a long time back. Anyone know him or heard from Don? I would like to know. Thanks, Dan Smith
  15. K

    55 TO-35 wet/dry compression

    I used the same guage that I used to check the compression on my rebuilt chevy 350 engine last winter, a gauge my Dad gave me. I guess to keep from being bothered, calling him for help all the time. Now I have you guys for that! hehe. Anyway I dont do this type of technical engine...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top