Recent content by Kenk

  1. K

    D-17 Hydraulic oil dip stick

    The dipstick is new as the old one was ground up in the pump I had to replace last year. I could always buy a new dipstick/cap combination but just though maybe someone had a solution for my problem. Thought maybe someone else had experienced the same issue at sometime. This is a 1959 model...
  2. K

    D-17 Hydraulic oil dip stick

    My D-17 hydraulic oil dip stick keeps popping out from the cap and falling in to the hydraulic pump. Any suggestions?
  3. K

    Steel wheel gear

    I have an old running gear that I want to make in to a hay rack. I want to make sure it can handle the weight for the size I build. It was once a steel wheel gear. My granfather cut off the rims and welded rubber tire rims on to the spokes. Any Idea what these old gear were rated for? 3ton, 4...
  4. K

    D17 Decals and gas gauge

    I did a quick search and found that external_link has the decals for your tractor. I think many other sites have them also. Just do an internet search for D17 decals. As long as you know which ones you need to get you should be able to find them. Good luck.
  5. K

    D17 Decals and gas gauge

    I have a post asking about the decals on page three right now. D15Dan gave the following "it depends on the SN. If yours is prior to #24001 then you have the correct decals." He is refering to the silver decal prior to 24001. Black lettering on White background after that serial number.
  6. K

    D17 decals

    Thank you both for your informaiton. Looks like I do have the right decals looking at the serial number.
  7. K

    D17 decals

    My D17 decals look different than any I have seen. It is a 1958 model that has been repainted. The "D17" is an oval sticker and the "Allis Chalmers" is white lettering instead of the black lettering on a white background. Were the 1958 decals different or did someone put some odd ball...
  8. K

    New Holland Baler chute

    Thanks Dave
  9. K

    New Holland Baler chute

    Thanks for the link Dave. I did find that the bale chute looks to be the same on all New Holland Balers. All they show is what I consider the second part of the two piece chute. Is the first portion of the chute included with another part?
  10. K

    New Holland Baler chute

    Is the baler chute on a new Holland 66 the same as on a New Holland 273? If not, what New Holland baler chutes would be interchangable with the 273?
  11. K

    which oils?

    I know I'll get many answers but... I have a Ford NAA and just picked up an Allis D-17. I have been using 10w30 or 10w-40 in the NAA. The former owner of the D-17 used 15w-40. Can I use 14w-40 in both? I live in minnesota and use the NAA in winter. Also what about the trans, hyd and rear. I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top