(800) 853-2651
SHOP NOW

Recent content by Kerwin

Yesterday's Tractor Forums
  1. K

    1650 Holley Distributor

    So after replacing the distributor cap, gapping points, etc., I finally replaced the distributor and that solved the problem. Tractor starts well and runs without cutting out as it had been. However, now it doesn't want to run at low idle. It did when I first put the distributor on a couple of...
  2. K

    1850 Gas Governor Questions

    Thanks. Most recently I was trying to cut hay with a NI 279 cutditioner and I had to just crawl thru the field in 2/2L to keep the tractor from dropping below 2000 rpm and really bogging down.
  3. K

    1850 Gas Governor Questions

    Would the main jet screw not being open enough cause this issue if not letting in enough fuel? It's got a Zenith replacement on it, do you know the setting for main jet screw?
  4. K

    1850 Gas Governor Questions

    Hey all, I think that an issue with the governor on my 1850 gas is sneaking up on me. It seems to be bogging down more and more when under load and lately I've noticed some surging/inconsistent engine speed at higher speeds and no load. Is there any maintenance or cleaning that might help bring...
  5. K

    1650 Holley Distributor

    Thanks for the suggestions. I did the fix of screwing down the vacuum advance plate in the distributor last summer. Tractor had started to cut in and out while running and point gap was getting messed up. Are there any internal parts in the Holley that can wear and not work properly?
  6. K

    1650 Holley Distributor

    What are the signs that indicate a distributor is past its prime? Still fighting an issue with my 1650 gas. Just wondering what the symptoms are for a bad Holley? First it was starting to periodically stumble while in use, then it progressed to not being able to start it or keep it running once...
  7. K

    Soutce for Eaton PS Pump Bushings

    Can anyone point me to a source for the shaft bushings for this belt-driven PS pump from Eaton?
  8. K

    Battery Size for 88 Gas RC with 12V

    Perfect. Thought that might be a possibility...thanks for confirming
  9. K

    Battery Size for 88 Gas RC with 12V

    Hello folks, the battery in my 88 gas RC needs replacing. The tractor has been converted to 12 V, and it currently has a Group 35 with 550 CCA. I'd like to get one with more CCA but don't know which group size will work. The door in the hood is kind of small, so I'm wondering what others are...
  10. K

    1650 Gas Stumbling Question

    Hey all, recently my 1650 has has started to habitually stumble and backfire when running usually when under load. Trying hard to see if there's a pattern for when it happens, but it seems random. I can make several rounds mowing hay without issue, then have it happen a couple times in quick...
  11. K

    1650 Replacement Temp Gauge Wiring?

    Thanks for the info. I'll try hooking it up that way. Would have been nice if it was just the same as original.
  12. K

    1650 Replacement Temp Gauge Wiring?

    Hello, replacing the original temp gauge on my 1650 gas with a Sparex replacement. Anyone know which wire goes where and how the back light is connected? Old one on the right, new one on left. Shouldn't be this hard and I don't want to connect things wrong and burn out the new one. Thanks!
  13. K

    Implement Salvage Yards

    Looking for a salvage yard in the Midwest (IA, IL, WI area preferred) that would have round baler parts. Need a left twine box for a New Idea 484 round baler.
  14. K
    Expired

    Wanted Twine Box NI 484 or 483

    Looking for left side twine box for New Idea 484 or 483 round baler.
  15. K

    Corn Crib Siding

    So I found a bunch of corn crib siding that someone had already removed, so I'm set there. Wondering what was used on the ends...was it some form of J-Channel like with regular steel siding or an L-channel that just capped the ends?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top