Recent content by LeoMilty

  1. S

    axel seals

    Hello again guys when reinstalling brakes and ax el on a 2n should I be using permatex on shims ? there is one shim between drum and brake and one shim between axel and housing. thanks again for everyone help Mike
  2. I

    Trimming Vinyl Windows

    Morning! I put in a couple new vinyl windows this fall and will do the rest in the spring. These are new construction windows. What's the best way to build the 1x trim to fill the R.O. come out flush with the drywall? I hear guys rip the lumber to get the right depth, building a box on a bench...
  3. D

    Fuel Filters Same as 8N?

    Good morning. Is the fuel filter system the same on my 53 NAA as on my 8N? (three filters). Thanks.
  4. A

    sprayer plumbing

    I am putting together a 300 gallon sprayer with a manual control valve and centrifigal pump. I am using a teejet style control valve and would like to see a picture of how the pressure regulation is setup. Should it be part of the agitation line or setup on it's own return line? Any advice...
  5. L

    9N Ignition

    I am helping out some friends repair their '41 (possibly '42) 9N and am having lots of problems with the ignition and getting spark. This is a 6V positive ground system still. The motor will turn over, but no spark at the plugs at all. So far I have replaced the coil, condenser, plugs, spark...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top