(800) 853-2651
SHOP NOW

Recent content by Machine249

Yesterday's Tractor Forums
  1. M

    Found a pin in the oil pan

    I found a .22LR case in the oil pan on my '52 8N when I tore the engine down. Lord know how or when it got in there, but there it was. Sorry... It's no help to you, just thought I'd threw it in there.
  2. M

    1710 Block heater

    Thanks Sean. The local dealer told me the kit was for the 55mm plug, I really didn't think any further about the other side of the block. I'll check it out.
  3. M

    1710 Block heater

    If anyone is interested, I just purchased a block heater from Kat's. Part #11440 is the closest match I could find, it is 54mm where the plug for the block is 55mm. I intend to try it out soon after it comes in, of course I need to get a replacement plug just in case it doesn't work out. I will...
  4. M

    1710 Block heater

    Thanks for the info fellas! I was hoping not to remove the freeze plug until I had the heater in hand, but I guess that's what I'm gonna have to do. Either way, a job for warmer weather. Thanks again.
  5. M

    1710 Block heater

    I want to put a block heater on my Ford 1710, but I'm having a hard time finding one. The NH part # is E3NN8B152CA and is no longer available. I contacted my local dealer and he told he could not find one through his aftermarket dealers either. I find it hard to believe that this is a one of a...
  6. M

    Haban Flail mower

    Thanks for the info Ray. After a quick google search I felt very much as though I was on my own. The unit is in pretty good shape I was just hoping to find some new blades for it. I guess I will have to match sizes with a production unit.Thanks again.
  7. M

    Haban Flail mower

    I'm looking at a Haban 520 4' flail mower for sale near me and was wondering if anyone could provide info on this piece. I'm not turning up much on google as far as replacment parts or anything. I would like to mount it to my Ford 1710 for mowing some tall grass and weeds around my place. The...
  8. M

    O/T: A question for TOH

    Thanks TOH! The whole shaft is only 9" long, so it should fit no problem. I'll give you a call in the next few days when I get some free time. Thanks again
  9. M

    O/T: A question for TOH

    Do you hire out your time for machine services? I have a dearborn 14-59 sickle mower that I am working on and the PTO shaft needs some work. I need to turn down a 3" section of the shaft from 1.5" to about 1.31" to fit inside of another piece of shaft. I know the last time I spoke with you that...
  10. M

    Dearborn PTO shaft

    Thanks for all the good info, I knew I could count on you guys! TOH, I hope you have your chains and plow on, if you need a hand this week give me a holler. I called antietam tractor before you gave me the part number and was told it wasn't made anymore. I called back after you posted with the...
  11. M

    Dearborn PTO shaft

    Thanks for the info fellas. TOH, I called Antietam tractor and the guy said he couldn't help me, I guess he just didn't want to. Do I dare go to ceresville? I've had more problems with those knuckleheads than enough. I guess now that I armed with a part number I can call back and get a real...
  12. M

    Dearborn PTO shaft

    I'm working on a dearborn 14-59 sicklebar mower and need the universal joints for the PTO shaft. I can't seem to find them locally or from the internet. Does anyone around here have a part number for them or has found them somewhere please let me know. It has a 7/8" diameter bearing cap and is 2...
  13. M

    Dearborn sicklebar

    Thanks for all the info fellas! Looks like I'll have another little project on my hands, shouldn't be a big deal thanks to all the drawings. Thanks again.
  14. M

    Dearborn sicklebar

    I just bought a 14-16 sickle bar mower, it came with all the brackets except for the lift extension arms. Are these arms absolutely necessary or can I make do without them? I have yet to accually hook it up to the tractor or else I guess I would know the answer. I am an ironworker by trade so it...
  15. M

    TOH valve job?

    Thanks for the info. As much as I like to do things myself, I talked to my local machinist and I'm gonna have him look at the seats (he said the same thing) and also cook it and check for cracks.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top