(800) 853-2651
SHOP NOW

Recent content by MattSillinois

Yesterday's Tractor Forums
  1. M

    Case 1070 pto question

    I am looking at a 1070 with 3870 hrs on it. The guy said the pto works but doesn't shut off unless there is a drag/machine to slow is down/stop it. What would be the issue with this and cost/ease to fix? Thanks in advance Matt
  2. M

    320 NH baler

    Update on my baler plunger project. I've gotten all the bearings seals and bushings replace and put back together. Took me three times adjusting the bearings before the plunger would fit back in the chamber. Once it did get your hands out of the way it rolled so easy! Got most all the...
  3. M

    New Holland 320 baler

    Well I received most of my plunger parts and started assembling them last night. I was looking at the book for adjustments. So my question is How do you get in the bale chamber and make adjustments that is called out in the book? They want me to measure distances from the rails and walls...
  4. M

    320 NEW Holland Baler

    When I take the plunger out would you guys recommend replacing all bearings and rails or just the ones in question? They are pretty costly. Thanks Matt
  5. M

    320 NEW Holland Baler

    I need to take my plunger out of my square baler. Is there any special hints that are out there you guys know to give me a hand in doing so? I do have an operators manual. Thanks in advance Matt
  6. M

    706 3 point sway blocks

    Do they make sway blocks for a 706 with three point so the lift arms don"t sway so much? If so where can someone get them? Thanks Matt
  7. M

    Gas 706

    I started cutting some hay last night to try things out. Cutter doing well but the tractor on the second round High 1 torque back just lost power and was falling on its face. I stopped shut off mower and idled down.It started running better. Sat there for maybe a short 5 minutes. Started mowing...
  8. M

    fort mower

    I have one and used it last year for the first time ever with a a disc mower. Was 3 yrs old when I got it. Did all the pms on it per the book and cut about 60 acres last years with not problems. So far no problems. Yea not a big name brand. But can't afford them either. Ken Sweet is a big help...
  9. M

    Radiator

    I live in central Illinois. A wihtout shopping around so far Ebay has new radiators for around $ 450 on up to $700. The radiator repair shop can put new cores in it or $525.00. and get a new one from them for 585.00. So I think I am going to look for new one. Thanks Matt
  10. M

    Radiator

    I posted on here a couple of weeks ago about pulling my radiator out and fixing it correctly or using stop leak. Well I pulled it out of my 706 and took it to a radiator shop. They called yesterday and said that it is junk. It is so rotten and pitted that I need a new one. OK so my question is...
  11. M

    tractor radiator leak

    Since its a haying tractor I will go ahead and tear it down and fix it correctly then. Have another to chore with so I have all winter to do correctly. Thanks guys for the replies!
  12. M

    tractor radiator leak

    On my 706 Gas tractor I have a small leak towards the top of the radiator. Is that radiator stop leak stuff ok for a fix or should I pull it out and have it repaired? Pros and cons of each is appreciated. Matt
  13. M

    706 gas dies

    Hi guys. I purchased a 706 gas last year.It sat for a while before I got. Be working the bugs out. The newest one is While mowing hay with a disc mower the tractor would slow down then die. I wait 5-10 minutes start it back up and continue for while the same thing. It even does the driving home...
  14. M

    706 gas Spark plugs

    What is the correct spark plugs for my 706 gas tractor? I've seen people use Champions D21,D18,D16 as well as Autolites 3116. So I gues I would some info what is recomended by those of you who understand spark plugs and tractors. Thanks inadvance Matt
  15. M

    Disc mower questions

    I have a disc mower and the book tells me how and why to adjust two springs 1 for the end of the bar and they other for the shoe pressure. I don't see in the book what is the shoe or bar end ground pressure is susposed to be. Can someone help me out with that? I asume pretty much most disc...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top