(800) 853-2651
SHOP NOW

Recent content by michehembr

Yesterday's Tractor Forums
  1. M

    Back fire

    I thank you for all the info. I have the I&T FO-4 service manual but its really hard to find anything in it. Confusing on where to find what and some of the type is really unclear on the photos/diagrams. where can a person get the parts list catalog, I'm sure I can download the manual I may...
  2. M

    Back fire

    I recently moved my tractor from that shed to the garage to work on the brakes and replace the seals. IT was running fine. After doing my repairs I started it up it ran for about 15 or 20 seconds then died. This happened several times so I cleaned the glass bowl drained the gas and drained the...
  3. M

    Help!!!! with 2N

    Ok thanks for all the great info. Finally got it after prying on the darn thing for over an hour. I think it finally came loose when on of the pins that holds the brakes actually came off and the springs pulled them in toward each other. It was a job now I got to do the other side waiting on new...
  4. M

    Help!!!! with 2N

    Yes I actually have the axle and assembly out but The brakes are what seam to be stuck and the assembly will not pull off. It comes up about a half inch then stops. I afraid to pry on it to much as I am afraid it will break something important. I'll just keep working at it. Its got to come apart...
  5. M

    Help!!!! with 2N

    Thanks I have the FO-4 service manual it gives a description of what is there but doesn't really say how to get the two apart. I have looked at the videos of replacing the seals and they have been no help. Thanks for your time and advice I'll just have to keep looking. Thanks Mike
  6. M

    Handshake agreement

    That's funny I like that.
  7. M

    Help!!!! with 2N

    OK I can not find any videos on how to remove the brake assembly from the axle and brake hub. I have loosened the adjuster as far as it can go but still can not remove the assembly. I tried to pry on it a little thinking that the brakes may be stuck because of all the grease but that didn't...
  8. M

    2N brake cleaning a seal replacement

    I have looked at older post on this subject (2016) and the links do not work. I can pretty much figure out the drum brakes but its the seal I have issues with. It just started leaking on the right side and its leaking pretty bad. Any videos or diagrams out there to show how to replace these as...
  9. M

    2N brake cleaning a seal replacement

    Thank you
  10. M

    2N brake cleaning a seal replacement

    I have looked at older post on this subject (2016) and the links do not work. I can pretty much figure out the drum brakes but its the seal I have issues with. It just started leaking on the right side and its leaking pretty bad. Any videos or diagrams out there to show how to replace these as...
  11. M

    2N hydraulic issues

    I want to thank everyone for their input. It seams that after reading the post from 47fivewindow that my dumb A$$ figured out that for some reason there must be weight on it in order for it to lower. I engaged the unit and then pushed down on the arms and they went down pulled the lever up and...
  12. M

    2N hydraulic issues

    The only lever I have moved is the one that makes the lift go up or down. This is the first tractor like this I have ever owned for terms of levers are pretty new to me. I grew up on a from in MI and we had IH a couple of Massys and a couple of Allis but all were newer and I very rarely messed...
  13. M

    2N hydraulic issues

    Ok, here is the deal lift was working great last week when I did some bush hogging. Now I spent some money buying a box blade to fix the drive my lift no longer works. I checked the fluid, (which by the way was just changed last fall) its full and clear looks new. I guess my question is how do I...
  14. M

    2N brake issues

    Thank you so much this helps a lot.
  15. M

    2N brake issues

    Thanks for the help, now that the rain has stopped and I can work on this thing do I need to turn it clockwise or counter clockwise? And would that direction be standing from the tire side looking toward the seat? Thanks Mike
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top