Recent content by moultrieman

  1. M

    OT...yr'ly "snow Cake" watch ..officially open

    Lots like fun plowing weather... By the way thanks so much for all your help with my carb! My N has been purring like a kitten! Till I broke my Starter drive that is.. Gotta fix that asap!
  2. M

    8n Engine Rebuild Continued

    Look at tool pawn shops.. I got a old valve spring compressor for 10 bucks!
  3. M

    Manifold Gaskets

    I did and not a leak!
  4. M

    Carb Popping

    Oh I"ve been riding all over! Even moved a couple rocks! It was the first thing I checked really. I wanted to make sure I had a good hot spark. After that I tuned at and shouted for joy.. even celebrated with a couple Jack and cokes!
  5. M

    Carb Popping

    I guess it wasnt my carb after all.. It was my #3 plug fowled out!!! Im sure my Carb needed the extensive cleaning that GB in Mt helped me with.. I got her all tuned and now she runs like a champ!! Thanks Gary
  6. M

    GB in MT Help

    Im gonna try a carb that I know is good to prove or rule it out. Then I will proceed with electrical from there. Thanks so much for your help!
  7. M

    GB in MT Help

    GB told me to use PB Blast. I have used both and seems PB breaks up rust and other materials better.. Carb and Choke cleaner are better with bad or gel'd up gas.. But thanks for the advise.. GB in MT is helping me thought this..
  8. M

    Anyone want to check out my carb?

    Let me know if you find out whats wrong.. I think were having the same problem!!!
  9. M

    GB in MT Help

    Ok so I know its taken me a while.. but I just got time to work on my Carberator. I took it all apart again and cleaned all of the passageway in you pics.. I used wire and PB Blast and Air.. Put the cab all back together and fired her up.. Let me tell you she Idles like a dream. When I give it...
  10. M

    De Greaser

    Mmmm That stuff seems pretty harsh!
  11. M

    De Greaser

    How do I get rid of Zep Industrial purple Degreaser... Its about 1/2 gallon and 5 3 gallons of water? Can I just dump that or....
  12. M

    GB in MT Help

    I cant find your email! I responded to your post. My Idle mixture screw dosnt do anything. I can turn it all the way in and all the way out and nothing. My Main mix adjustment needle was bent a little I straightened it and when I turn that all the way in it kills the motor and if I turn it all...
  13. M

    Pls help

    I cant find your email.. I tried adjusting the carb like the book says and my adjustment screw dosnt do anything.. I can back it all the way out or tighten it all the way and nothing. It starts right up and idle no prob... No power at full throttle and back fires... and pops through the carb...
  14. M

    Pls help

    Thanks!
  15. M

    Pls help

    When I pull the throttle back to get more power it seems like its getting too much gas and looses power a little. Im sure this is a carb adjustment thing but I have the idle set good and I turned the air fuel mixture screw on the body of the carb and it doesn't seam to do anything..
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top