(800) 853-2651
SHOP NOW

Recent content by noidea

Yesterday's Tractor Forums
  1. N

    painting ?s

    How cold can the air temperature be to still be able to paint a tractor nicely? I dont have a heated shop. Am I just going to have to wait to spring?
  2. N

    OT double turbo

    I have an old 12 valve cummins in a dodge i want to play with. I have a turbo off of a 466 that is collecting dust. Is there any way I can put that turbo in front of the stock turbo on the engine to make it spool better? Anyone tried anything like this before?
  3. N

    code read

    The fuel shutoff solenoid works with switch as well. How do you get to the underside of the fuel filter?
  4. N

    code read

    I ran 12 volts separately to the shut off solenoid and it clicks. I left the juice on it and I cranked the engine over and still no fuel comes out of the lines. I will check the grounds now. Thanks
  5. N

    code read

    Nevermind about that I figured it out. I used a jumper wire from A to B. Now could someone explain this to me::::::::::::::::: I have a 1994 Chevy C1500 with a 6.5 naturally aspirated. It will not start. There is no fuel coming out of the injector lines. There is good fuel flow to the pump. From...
  6. N

    code read

    Nevermind about that I figured it out. I used a jumper wire from A to B. Now could someone explain this to me::::::::::::::::: I have a 1994 Chevy C1500 with a 6.5 naturally aspirated. It will not start. There is no fuel coming out of the injector lines. There is good fuel flow to the pump...
  7. N

    code read

    I have a 1994 chevy c1500 with a 6.5 diesel. I was wondering how to read the computer fault codes. For that year do you use a code reader or do you cross wires and watch the light blink? or is it something else?
  8. N

    6.9 diesel

    I"m looking at a 1986 ford dully. Can anyone tell me the goods and bads of the 6.9 diesel?
  9. N

    1086 brakes

    Is this just an air problem? The brakes worked fine last year. I havent started the tractor since. I got in it this year and started to go, needed to stop and the pedals went to the floor. I pumped them for a while, and then they got hard again, but after a while they go soft again and take a...
  10. N

    FARMALL 460 PULLER ON EBAY

    Who cares how the hitch is set up? If you don"t like it fix it yourself. If your not smart enough to build your own hitch you have no business on a tractor.
  11. N

    polarize

    I tried to polarize my generator. It is on a cutout system. I was told to just take a hot wire and tape it against the posts on my generator. I did that life 5 different times and it is still charging the opposite way. If I take my tester and put it on A terminal and the other on the ground it...
  12. N

    polarize

    I tried to polarize my generator. It is on a cutout system. I was told to just take a hot wire and tape it against the posts on my generator. I did that life 5 different times and it is still charging the opposite way. If I take my tester and put it on A terminal and the other on the ground it...
  13. N

    multispark problem

    0,14,0,14 etc
  14. N

    multispark problem

    I am using the points as the trigger. It is not a waste of money, this tractor is hopped up a good bit. A regular system wasn't good enough.
  15. N

    multispark problem

    What is wrong with my Summit Racing multispark ignition box. All of the wires are hooked up correct according to instructions. It would run on what seemed like two cylinders for about ten seconds. Now it won't start period. The light flashes when you turn the key to indicate that the unit is...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top