Recent content by Pnettis

  1. P

    It's a leaker now

    I had a similar problem and it was the tork tube seal...make sure it is either engine oil or gear oil...good luck!
  2. P

    Eagles nest AKA tractor shed is full

    What a nice looking flock...winter is coming
  3. P

    Case vai 1955/56

    Wondering if anyone has a hand crank for the engine Thanxs
  4. P

    1956 Case VAI , checking oil levels

    Evening all, Checking all the oils and looking for the diff oil level/ fill locations as well as the transmission oils levels/fill location and how to check the oil levels. Seems easy to find but not sure if all those sections ( tork tube, transmission and diff) shares the same oil from the...
  5. P

    1956 Case VAI , checking oil levels

    Sorry..the link,is not working for me
  6. P

    case Vai fuel line

    Finally got the tractor running for the its maiden trip..thank you all for your Help..still a lot more work to be done but it is moving And stopping on its Own power
  7. P

    case Vai fuel line

    I have a 1956 case Vai tractor and trying to figure out the size of the fuel line should be The current line from tank/fuel cup to carb is too far gone to reuse Tried a number of configurations to make one but not having alot of luck at this Is there a p/N or is it a hand made piece
  8. P

    case Vai fuel line

    Thank you for all the comments and suggestions..been going crazy trying To get this right or at least close to what it should be
  9. P

    case Vai fuel line

    Thanxs...the line is a combination of copper , rubber hoses and clamps.. Not even sure if the fittings are correct?? Or the carb.. Do you know if there is p/N for this or is it just made up Would like to get the correct one if possible or at least the correct dia?
  10. P

    Case VAI 1955/56 tractor _clutch

    Thanxs...the clutch disk was all oiled up...had to replace the seal on the quill and cleaned up everything. The clutch caught at the top and jerked into place..I assumed It was how it worked at the time.. Got some good parts from John S. and started to put it back together I will check the...
  11. P

    Case VAI 1955/56 tractor _clutch

    Evening,,,I am replacing the clutch disk on the tractors and like to know how to adjust the finger/levers to the new disk correctly when you don't have the t131 tool Per the manual.. Are there any measurements I need to take before or after I start the replacement process? Is there some basic...
  12. P

    starter ring gear

    I have a case 1955/56 VAI tractor and just split it in two I am in the process of replacing the quill seal and throw out bearing and noticed The fork is lose by the hold down bolt, the Screws on the sliding part of the shaft Where it is rivited to a cup the holds the other end of the threaded...
  13. P

    starter ring gear

    Thanxs..but would like a replacement ring if possible The fork looks a little rough by the pivot end
  14. P

    BigMo 400

    Thank you...got so many projects in the yard going on at the same time, a pic of just the brake assembly would be great. My hope is, it is just a spring or two or a pin that broke or fell out. I did look around for another MM in my area but nothing at this point...very few if any. If you send...
  15. P

    BigMo 400

    Afternoon I recently rec a BigMo 400 (bucket/Backhoe) The Brakes are gone or disconnected? Are there any pictures and p/n available to see what could possibly be the problem? thanxs pn

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top