Recent content by Prean

  1. P

    Rebuilt engine not starting

    We got a new one to but I’m using the old one now to eliminate that as out problem
  2. P

    Rebuilt engine not starting

    We did, still not running gonna use the ultrasonic cleaner to clean it again
  3. P

    Rebuilt engine not starting

    It’s a new carb from isavetractors. Are they any good? First one I ever used
  4. P

    Rebuilt engine not starting

    It does start. I think we gotta clean the carb
  5. P

    Rebuilt engine not starting

    I set them to what the service manual sed
  6. P

    Rebuilt engine not starting

    .004 I grinded the valve stem and it’s now in spec
  7. P

    Rebuilt engine not starting

    The plug and wet and sprayer starting fluid in the carb. It’s a new carb from isavetractors so it should be clean
  8. P

    Rebuilt engine not starting

    The exhaust was at .11 and Intake was .04 so we ground the stem so it’s correct and now it has to much compression it seems
  9. P

    Rebuilt engine not starting

    I didn’t replace the valves but not sure on clearance, we have the coil system on ours not a magneto
  10. P

    Rebuilt engine not starting

    I thought so also but both marks line up and it backfires with gas or starting fluid and doesn’t start
  11. P

    Rebuilt engine not starting

    when I pulled the bowl off the carb it was full of gas and we used starting fluid to
  12. P

    Rebuilt engine not starting

    I have a kohler k161 I rebuilt. New piston and rings, rod everything pretty much and it won’t start only runs off stetting fluid and it’s more of a back fire and won’t start up any ideas what it could be? Timing marks are right and new coil and points set to .20
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top