(800) 853-2651
SHOP NOW

Recent content by randaleky

Yesterday's Tractor Forums
  1. R

    HD4 Dozer - Torque Converter Hydraulics problem? Won't move

    do not forget the fact that it ran when you picked it up and unloaded. i think the main factor is that you drained the oil and now it won't move, but you could only get 1/2 the required oil back in torque housing. try to get near the book 33 quart and it should move.
  2. R

    TOW BAR ON 450 C JOHN DEERE

    i bought a john deere 450 c track loader and the bolts that hold the tow bar/ weight balance are broke which lets the tow hang down. i do not have a book on the loader and would appreciate and info or postings on manual for best way to lower the tow to drill bolts out. thanks
  3. R

    TOW BAR ON 450 C JOHN DEERE

    I HAVE A JOHN DEERE 450 C TRACK LOADER WITH A TOW BAR PACKAGE FOR WEIGHT AND PULLING. THE BOLTS WERE BROKE ON THE TOW PART AND IT HANGS DOWN 6 INCHES BELOW FRAME. I DO NOT HAVE A BOOK TO SEE HOW IT ATTACHES OR HOW LOW I WOULD BE ABLE TO DROP IT DOWN IN ORDER TO DRILL OUT THE BROKEN BOLTS. ANY...
  4. R

    clutch

    BLOCKED PEDDLE DOWN ! THANKS
  5. R

    clutch

    TRIED YOUR SUGGESTIONS. IT WORKED. FREED UP WITHIN TEN FEET. THANKS
  6. R

    clutch

    THANKS FOR THE ADVICE. WILL TRY IT
  7. R

    clutch

    i have a 1964 ford 2000 backhoe and the clutch is stuck and will not release. clutch peddle is strong. clutch was installed new 5 years ago and unit has less than twenty hours use since installing. do not want to have to split the unit again. suggestions needed please. thanks :?:
  8. R

    Adding adjusters on an allis hd crawler

    DO YOU HAVE A DOZER OR LOADER & WHAT YEAR IS YOURS? PTO SHAFT? SIX WAY BLADE IF DOZER? HOW LONG HAVE YOU OWNED THE HD4? DO YOU DO WORK FOR THE PUBLIC OR JUST USE FOR YOURSELF?
  9. R

    Adding adjusters on an allis hd crawler

    IF YOU CAN FIND SOME NEVERSIEZE TO PUT ON THE THREADS IT WILL BE BETTER THAN GREASE. GREASE CAN DRY UP AND CREATE A GLOG. NEVERCIEZE WILL BE BEST IN MY OPINION.
  10. R

    Adding adjusters on an allis hd crawler

    I LUCKILY ADJUSTED BOTH SIDES OF MINE TODAY. I TORCHED THE BOLTS FOR THE LOCKING PLATE. LOOSENED THE PLATE, TOOK A 16 INCH ADJUSTABLE WRENCH AND PUT IT OVER THE ROD. TOOK A 4 FOOT CHEATER PIPE AND BEGAN TO WORK THE ROD BACK AND FORTH A 1/4 INCH AT A TIME. THE MORE I WORKED IT THE LOOSER IT GOT...
  11. R

    Adding adjusters on an allis hd crawler

    i am also trying to take the slack out of my chains. a real pain. i do not know when they added the easy type, but i wish it was before 1965....
  12. R

    Screeching HD3

    MAYBE FAN BELT SCREECHING ?
  13. R

    Allis H4 crawler parts numbers

    SHOULD BE THE SAME UNDERCARRIAGES ON YOUR LISTING. WHERE ARE YOU LOCATED, SOMEONE MAY BE CLOSE ENOUGH TO STOP BY AND HELP YOU. PARTS CAN BE OBTAINED FROM BLOUNT IN GEORGIA. 1-800-659-3111.
  14. R

    metal bandsaw blade

    thanks for the info.
  15. R

    metal bandsaw blade

    just recently purchased a EMERSON 10 horizontal metal bandsaw, and can not find any information on the blade size. i know it uses a 1 inch wide blade and should probably be around 8 teeth per inch, but i am not sure on minimum and maximum length. any help appreciated.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top