Recent content by Rkh

  1. R

    Landlord 2110 stalls after 15-20 minutes

    My 10hp briggs stalls after 15- 20 minutes. I changed plug after a half hour and it started back up. Put old plug back in and no luck. Could something cause the plug to go bad? My tractor is original except electronic ignition and battery. It's a 1968 simplicity landlord 2110.
  2. R

    Simplicity Landlord 2110 PTO

    1968 for both tractors. One of them was my dad's. Has original engine for both and neither use oil. Cast iron to.
  3. R

    Simplicity Landlord 2110 PTO

    My 1st landlord I used for mowing is giving me trouble, so went with second landlord but PTO when engaged, the idler pulley won't line up with pulley(as per picture). I took pictures, but hard to see everything. Any ideas how to fix? Also, when engaged, both pulleys hit each other and sparks fly.
  4. R

    Simplicity Landlord 2110 sparkplug carboned up

    Champion RJ19LM
  5. R

    Simplicity Landlord 2110 sparkplug carboned up

    Is this from rich carb setting? Is it part 4 on the diagram to adjust carb?
  6. R

    MF50 Stuck in Gear

    I had a MF 65 and it that to me. Take the big nut by the shifter off and use the screwdriver method down that hole
  7. R

    Back on the roof

    The next heavy windy rainy storm, if you have access to the attic, see if you have wet spots. I did that and found a small leak. It wasn't dripping enough to get past insulation.
  8. R

    Question on NiMH batteries

    Make sure batteries in the right way. I have same charger, batteries and use a game camera. I'm betting something wrong with camera.
  9. R

    Putting the Generator away

    I do that with my portable generator to(turn off gas valve & let run until stalls).
  10. R

    Compression on a briggs 10hp

    I have 2 simplicity landlord 2110 tractors with 10hp briggs cast iron engines that are 57yrs old. One of the tractors was giving problems, would have to run 1/4 choke to keep running. Cleaned carb and gas tank and did run better. Decided to check Compression and both read 75lbs cold engine. Is...
  11. R

    Looking for recommendations for gloves to handle hot things

    I meant taking food out of oven, handling hot firewood,etc
  12. R

    Looking for recommendations for gloves to handle hot things

    I'm not a welder, but do you guys recommend them to handle things like oven, hot wire wood, etc? Or do you recommend another type of gloves?
  13. R

    GardenPro Game Camera model:A3 settings

    What setting should I be using since I'm not getting any pictures or videos on an open field 130feet away next to a camper and house?
  14. R

    Kubota M4900 shuttle shift issues

    Kubota a forum if your not aware. https://www.orangetractortalks.com/forums/
  15. R

    Wash Machine Replacement

    I just bought a speed queen washer & love & would recommend.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top