Recent content by sniperwolf

  1. S

    farmall 350 powersteer

    the plug that goes into the hyd valve that makes powersteering work what size/long is it
  2. S

    farmall 350 power steering

    on a farmall 350 rc Behan power steering it only works if i hold a hydraulic lever down took the priority valve off and springs are good when you remove top 4 bolts and the valve on the side with the snap ring is good but getting that valve out it was tightbut no burra on it cleaned it with wire...
  3. S

    farmall 350

    anything i should watch out for when removeing it can i remove one snap ring or should i remove the whole valve dont really wanna take gas tank off just for that
  4. S

    farmall 350

    i cleaned the screen part 10 is showing screen
  5. S

    hydraulic cylinder on a freeman 2000 trip bucket for tilt

    thoughts on putting a double action hydraulic cylinder on a freeman 2000 trip bucket for tilt and doing away with trip mechanism is it worth buying/doing
  6. S

    farmall 350

    what would cause a behaln powersteering not to work on a farmall 350 rc ive replaced all the o rings on the whole tractor and put new hoses on but when i move one of the hydraulic levers powersteering works fine could the powersteering valve not be centered with the pressure hose outlet?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top