Recent content by TD-5

  1. S

    300u Axle Seals

    My 300 utility is leaking oil from the axle. Would it help to shoot more grease in the zert? I think not but had to ask!I forget is there an oil seal in there? Also a gasket between the metal?Thanks in advance
  2. T

    T4 low profile international crawler

    The 3 point hitch was specific to the T-4,T-5,TD-5. However some of the linkage pieces may cross over to wheel tractors, I don't know. The first series 500 crawler was also available with a three point hitch , although the part #'s changed it should also fit.
  3. T

    T4 low profile international crawler

    The only place I know of for the steer clutch adjusting link is PD Mechanical in New York. They are New aftermarket http://www.pdmechanical.com/details.asp?key=11626
  4. T

    T 4 low profile international crawler

    The LP crawlers in this series of machines ie T-4,T-5, TD-5 are very rare, there are no #'s as to how many were made, but probably not many. I have seen less Low Profile tractors than the wide gauge tractors & the wide gauge machines are quite rare. As to value..... it depends on how bad someone...
  5. T

    TD6-62series brakes

    http://www.tpaktopc.net/td6strcltch.htm
  6. T

    500E trans parts

    Some of the parts in the 500E power shift clutch pack are common to the power shift trannys in the 500, 500C, TD-7 & TD-8 so parts should be available. try "Browns International Services" @ 1-250-546-6518. They specialize in IH/Dresser machines
  7. T

    Ford 4000 starter trouble

    I agree, make sure its not the neutral safety switch first, On ours, 9 out of 10 times turn the key & nothing happens, have to wiggle the hi/low lever to close the safety switch..... at least no one can steal it.
  8. T

    T5 Dozer Whats it worth?

    History- The short version, These little crawlers were built in 3 models, T-4, T-5,& TD-5 from 1959 to 1964 by International Harvester at their Hamilton Ontario Canada Plant Physically they were all about the same size, T-4 & T-5 were gas, C-123 & C-135 respectively. TD-5 was Diesel...
  9. T

    T5 Dozer Whats it worth?

    Serial # indicates 5 roller track frame, transmission driven PTO, & Torque amplifier. The "V" indicates the Exhaust Valve rotator option on the C135 gas engine. You said it had extra wide tracks?, track pad options were 10", 12", & 14" width. If the pads are wider than 14" they may be from...
  10. T

    Unknown Crawler

    OPPs, Wide gauge is 68" not 60" , sorry
  11. T

    Unknown Crawler

    I"d agree, Either T-4 or T-5 gas model International with the 60" wide gauge option....Nice!
  12. T

    INTERNATIONAL 500E DOZER MANUALS

    Binder books offers complete sets or individual sections: http://www.external_link/
  13. T

    INTERNATIONAL 500E DOZER

    The engine is a D-155, 3.875"bore x 4,375" stroke, rated 44hp @ 2500rpm in the 500E. The engine was manufactured by International Harvester at their plant in Neuss Germany. It belonged to a family of engines D-155(3cyl) D-206(4cyl) & D-310(6cyl). The D-155 was also used in the model 385 & 395 Ag...
  14. T

    TD-5 Crawler

    BD-144C was the engine that came in the TD-5, this engine was also fitted in B-270, B275, B276 AG tractors, 2300A Industrial tractor & in the #201 Windrower. BD-154 replaced the BD-144 engine round about 1965. These are the same engine with larger bore, they would be direct replacement. The...
  15. T

    International T5

    With that serial# the machine is a "B" series built 1963 or later. The "B" series was an improved version of the original models built since 1959.Actually production of these models ended at the end of 1964, so the machine is 63 or 64. The A designates it has a 5 roller track frame. It weighs...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top