Recent content by Terry from Mo

  1. T

    Jubilee update

    Multimeter shows 6.38 volts at the battery. Drops to 5.8 while cranking. Weak spark at the points. No spark at the plugs. + post on the coil shows open loop while cranking. Not sure if it is suppose to do that. Once again jumped starter with 12 volt jump box and fired right up.
  2. T

    Crank no start

    For some reason it didn't post my reply. Try it again. I have noticed that it floods rather easy. I've had a carb kit hanging in the shop for years. May be time to use it.
  3. T

    Crank no start

    No resisters that I know of. Still leaning toward an electrical problem. Tractor runs great. The problem is just getting it to start the first time,after that it's fine.
  4. T

    Crank no start

    It cranks good all of the time.Just won't start the first time I try to start it. Once it is started the first time it will start the rest of the day.Then next day samething.The spark at the points doesn't look real strong to me.
  5. T

    Crank no start

    The tractor doesn't get used a lot.The battery went bad just from setting plus it was old too. As far as the starter,it got where it would spin but would not engage the flywheel. After having it rebuilt it still acts up once in awhile. When it messes up I can tap on with a soft face hammer and...
  6. T

    Crank no start

    Been a long time since i`ve been on this forum but asking for some suggestions. My Jubilee still has 6 volt system. Has brand new battery and starter was just rebuilt. When i attempt to start it first time every day it cranks over good but will not start. I can take my 12 volt jump box and touch...
  7. T

    Super C Wiring question

    I got the old thing to start and run for a few seconds this morning so i will probably be in the market for some parts soon. Really needing some good front rims or rims with a decent set of tires.
  8. T

    Super C Wiring question

    Thank you old.I appreciate it.
  9. T

    Super C Wiring question

    Thanks Old for your reply. Do you think i should run a new wire between the neg term on the coil to the mag or leave it alone? This tractor was pulled out of a barn and not sure if it ran when it was parked. So i don t know if it needs that wire or not in order to run. Like i said,the wire...
  10. T

    Super C Wiring question

    Don t know a lot about a Farmall but had a Super C give to me a couple of years ago with a stuck engine. Pulled the plugs and filled the cylinders up with all different kinds of snake oil and she has been setting ever since. Went out yesterday with a pry bar and was finally able to get the...
  11. T

    Boonvillekid get ahold of me.

    Tried calling your number but for some reason its not working. Had a question about your SC parts tractor. Please get in touch. [email protected]
  12. T

    Super C

    Gene i took a flashlight and took a look at the cylinder walls and to my surprise they all looked pretty clean and shiney.Gonna let them soak awhile and maybe i will get lucky and she will break loose.I m in the market for a decent front rim and tire if anybody has one laying around so i can...
  13. T

    Super C

    I sincerely appreciate all of the comments and suggestions.
  14. T

    Super C

    I will do that Delta but thats a ways off.Not sure how many years this thing has been setting or if i will be successful at getting her unstuck.I work with a guy that restores John Deere s and he has bought several that were stuck and he told me to fill the cylinders up with a mixture of...
  15. T

    Super C

    Thanks Owen for that info.I may give you a shout later on if i get the engine unstuck. Thats my main objective right now.Have a good weekend!!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top