(800) 853-2651
SHOP NOW

Recent content by Tom vertiz

Yesterday's Tractor Forums
  1. T

    4020S

    Anyone know anything about a 4020S? This particular tractor was made in Germany. Problem is it is stuck in 4x4. There is an output shaft going to a driveline to the front end. I believe this is a transfer case type not a pto to front end. There is what looks like a shift solenoid in that area. I...
  2. T

    706 will not run at high rpm

    Got it!!!! At this point I don?t even care that it was my fault. When I put the new float in there is a Venturi that goes in between the upper and lower part of the carb. It fell out when I was changing float and I never even saw it in there.. I looked several times for a breakdown of the carb...
  3. T

    706 will not run at high rpm

    I took off old fuel line and inline filter and got it to run 32 oz in two minuets. Still same thing
  4. T

    706 will not run at high rpm

    How do you set float drop. I see no way of adjusting unless you bend the float.
  5. T

    706 will not run at high rpm

    In two minuets it ran 26 oz. that is a little shy of the two pints someone else mentioned
  6. T

    706 will not run at high rpm

    I can check tomorrow but fuel is flowing unobstructed when I take off the fuel shut off solenoid. Float also shuts fuel off when float bowl is full. I can tell by blowing into the fuel line when carb is full of fuel.
  7. T

    706 will not run at high rpm

    Forgot to add I was running 87 octane fuel but I recently put in 93
  8. T

    706 will not run at high rpm

    So I better start of with warning you that I have pretty much done every shortcut in the book to keep this tractor running. I made a few of my own gaskets for carb as well as took of sediment bowl and replaced with inline filter. Just getting that out of the way, feel free to tell me I should...
  9. T

    Pickup A/C question

    I would just fix what is wrong. Also how much Time ahead are you? To change the receiver dryer and orrifice. All you need to do is recover the system and pull a vacuum again. Even if I didn't have the equipment for ac I would only fix the hose. PS I work for a construction company and do ac...
  10. T

    First project for the 706

    No I got busy doing the loader, and then with a job, two kids and a wife that pretty much takes all my time. Luckily a friend gave me a couple of cylinders I am sure I can get something figured out that will work. I will post pics when done but will make no promise of when.
  11. T

    2$ Yard Sale Find: 50$ Loss

    While on vacation we ran into a family reunion doing a scavenger hunt. Someone dropped a 10 dollar bill on the ground, we did not notice until after they had left. We ran into them in the lobby and gave it to the group and told them what happened. We had our 7 and 2 yr old children with us, the...
  12. T

    American Pickers...

    I don"t know him but the stuff was his dads, his name was Bill Raymond. The welder at out shop used to work for him I think in the 90"s. I have herd plenty of stories about that place, most of them at least 3 times. I am sure it will take him about one second to ask me if I watched the show.
  13. T

    Identify this tool

    Yes it was a charity auction. Of I could sell them at that price I would change occupations real quick.
  14. T

    Identify this tool

    Here is the pic
  15. T

    Identify this tool

    Who knows this one. I made it for the Mesa county wool growers auction yesterday. It brought in 375 dollars.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top