Recent content by tractortom336

  1. T

    2520 Oil Pressure

    I bought a 2520 with 1650 original hours on it. Its been sitting outside and only started every few years. I started it up the other day and everything seemed fine until I noticed it had 0 oil pressure on the gauge. I shut it down immediately. The original owner had used it around the yard...
  2. T

    2950 Stuck in gear

    I had to move it yesterday and drove it down a slight hill. While going down the hill I was pulling on the lever and it popped out of gear. Seems to be OK for now will be using it today and will see what happens
  3. T

    2950 Stuck in gear

    No towing or coasting. Picking corn and stopped to empty the gravity wagon and it was stuck in gear.
  4. T

    2950 Stuck in gear

    I have a 2950 with a cab and it is stuck in gear. The hi / low / reverse lever works fine. The one that selects the gears is stuck. It is stuck in 3rd gear in low and 7th in hi. I disconnected the linkage at the rods that go down to the transmission and the linkage and levers are free. The rods...
  5. T

    Case sleeve installation

    I am installing the sleeves in a Case SC after replacing the O-rings at the bottom of the sleeves. What kind of lubricant can I use to help things along. I have installed 2 sleeves with petroleum jelly which seemed to work pretty well. Any concerns with the petroleum reacting with the o-ring? I...
  6. T

    SC Sleeves

    I thought about that and looked closely at them. They look perfectly square to me and appear to be square originally
  7. T

    SC Sleeves

    I am working on a Case SC. I am replacing the O-rings for the sleeves. The replacement O-rings are round, while the originals are square. Was this a change or a mistake by my parts guy?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top