Recent content by traded

  1. T

    Wire replacement

    Thx definitely in a very harsh environment and need something that’s going to stand up to the heat and dust.
  2. T

    Broken Hub- Warning- check those rear axle nuts!

    Good grief glad all is okay.
  3. T

    Wire replacement

    Thank you for the info!! I'll have to look the site over and do a little research on the GXL/TXL insulation. I wasn't aware of the soybean base for current wire insulation, this can become quite detrimental in the years to come.
  4. T

    Wire replacement

    The plan is to tear into it this winter and rebuild the whole thing again. Does anyone suggest a quality wire company that holds up to the heat and abuse?
  5. T

    1520 heat

    I run Hy Gard, full change 2 years ago with suction screen cleaning. I changed the Hydro filter after this last field work and had some milkiness in the oil filter housing, but not all was milky, dip stick is clean oil.
  6. T

    Wire replacement

    Over the winter of 2024 I rebuilt the wiring harness on my 1520, all went well and operated perfectly for last year's hay production. This year deterioration of the wire has occurred what seems exponentially, does anyone have a wire manufacturer suggestion that can hold up? I went the cheap...
  7. T

    1520 heat

    Good morning, I have a 1520 gas that I use for raking and tedding purposes and have noticed significant heat in the transmission area below the seat, also, at the end of the day ended up losing the brakes as well. I have noticed over the past year or so a decrease in the 3-point raise and a...
  8. T

    Before and after

    Nice piece of machinery!
  9. T

    720 MOCO

    Good morning, I'm replacing the reel cam on my 720 mower/conditioner due to reel bar/tooth bar breaking and "tearing out" the side of the original cam. While disassembling I noticed a lot of side-to-side play of the reel frame, and 8 of the 9 washers required on the right side outside of the...
  10. T

    Removed by Author

    Removed by Author
  11. T

    Hay/Forage Salvage Equipment

    Thank you everyone for the responses. I ended up contacting Fry's Machinery in Pennsylvania and they were successfully able to locate one in their yard.
  12. T

    Hay/Forage Salvage Equipment

    Yeah, I called and they weren't able to locate it.
  13. T

    Hay/Forage Salvage Equipment

    Joeysmith thanks for the link, I'll have to contact tomorrow morning and inquire. Roger I've tried googling the part number and haven't had much luck.
  14. T

    Hay/Forage Salvage Equipment

    Thanks for the response, wasn't successful there. I currently have it at a weld shop, they aren't to sure if they will be able to fix it. Trying to find an alternative if the repair isn't possible.
  15. T

    Hay/Forage Salvage Equipment

    Good afternoon everyone, I've been looking for a replacement cam for my John Deere 720 MOCO. John Deere determined the part to be obsolete last year 2024 and am having one heck of a time trying to find a used one. Does anyone know of where there may be a used one, it looks as if the 710, 720...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top