Recent content by True Son

  1. T

    Buried Amp or Volt Gauge

    The amp or volt gauge on my Super C is buried all the way to the right, or max Charge even when the tractor is shut off and the button is pushed in. I recently converted it to 12 volt and it worked fine the first time I used it. Thanks for any help.
  2. T

    Over Charging

    It’s go to 20 amps….but needle is beyond that like when I buried the speedometer on my ‘67 Plymouth Fury!
  3. T

    Over Charging

    Battery was new in April of this year.
  4. T

    Over Charging

    After it sits for a couple of weeks my meter was showing 12.5 volts at the battery. …then when I started it it was still showing 12.5 volts at the battery but the amp meter on the tractor was pegged to the right or over 20 amps.
  5. T

    Over Charging

    I have never posted pictures. The battery was new earlier this year. I’m going to take the battery out and check out the wiring to see if there’s not a dead short somewhere. At least I know it’s not cooking the battery! Amp meter may be shot?
  6. T

    Over Charging

    OK, so went to the farm on Saturday and the b super C is showing 12.5 to 13 volts at the battery while running. The amp meter is showing pegged to the right or full overcharge. So what’s the problem?
  7. T

    Over Charging

    My Super C is 102 miles away down at the farm. I will be there this Saturday mid morning and will check out then!
  8. T

    Over Charging

    It’s a 1 wire
  9. T

    Over Charging

    It has an ammeter….factory. It worked fine for several months/starts and then all of a sudden it pegged the needle to the right!
  10. T

    Over Charging

    Is my alternator shot? It’s brand new…
  11. T

    Over Charging

    And what do I do if it’s over 14.8 volts? It’s a wire GM alternator.
  12. T

    Over Charging

    My Super C with a recent 12 Volt conversion suddenly started pegging to the right the original volt meter overcharging. it worked fine for the first few weeks and now overcharges. What’s wrong?
  13. T

    Super C hard to start after 12 volt conversion

    The new 12 volt coil came with a Brillmann 12 Volt conversion kit and it DID say internal resistor On the coil.
  14. T

    Super C hard to start after 12 volt conversion

    I put on a new 12 volt coil with internal resistor
  15. T

    Super C hard to start after 12 volt conversion

    I just converted my Super C to 12 volt. Now it’s hard to start? It always fired right up on 6 volt…
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top