Recent content by Uppercanada

  1. U

    Belarus 611 '89 Starter Relay

    I"m trying to help a neighbor out with the battery wiring on his "89 611. He installed a new parallel switch (very incorrectly) so I sorted it out according to this: (he was told that the old switch was bad, with no real testing - but I am really starting to wonder if just the starter relay...
  2. U

    Roosa Master Pump - What does this fit?

    Cores are $300 not $400.... I just checked.
  3. U

    Roosa Master Pump - What does this fit?

    Thanks for that quick reply.... And with that info I was able find out it fits a 1010 JD Crawler, mainly 0-30,000 serial range (It is a DBGVC429-1J, forgot the 1J part in my first post). This was a "shelf part" that was with a bunch of other yellow parts from the same machine. Of course I...
  4. U

    ON Star no longer a problem!!!!

    Makes me wonder if you were to unplug the onstar module (computer, brain, whatever) would these new vehicles even run? Car theives a few years ago would apparently unplug the onstar module located somewhere behind the glovebox when they drove off with the fresh kill - I bet things have changed...
  5. U

    Roosa Master Pump - What does this fit?

    Scratching my head trying to figure out what this fits. It has some yellow paint on it so it may be for a Caterpillar...? Model is DBG VC 429. Two other stamped numbers are 184113 and AT12457T. The mount flange has 2 holes. Any ideas out there? Thanks for your help!
  6. U

    Bolens 54 deck pto input rpm??

    I have a 18071 54" Bolens deck in excellent shape and I was wondering what rpm the input shaft runs at. I would like to make this deck a rear-mount 3-point mower for my Case VA #with a little easy fabricating# but first I need to figure out if it is a 540 RPM deck or not. Thanks.
  7. U

    Tractor Tire Weight Guess - Loaded w/calcium

    I am wondering how much a set of 15.5 x 38 tractor tires and rims loaded w/calcium might weigh? They are off a Farmall 400. I intend on hauling them in a Dodge Ram 2500 4x4 w/helper springs. Any guesses appreciated. Thanks. Untitled URL Link
  8. U

    John Deere 100 Quik-Tatch Corn Picker

    I am looking for such a picker - email me please at [email protected] or call 613-571-8970 Thanks
  9. U

    830 Case - Cracked block, sleeve - coolant problem?

    Right or wrong: If the head is cracked there is compression escaping through the crack(s) (or through a bad head gasket) into into the coolant jacket therefore forcing the coolant out of the rad cap....
  10. U

    830 Case - Cracked block, sleeve - coolant problem?

    I'll take that advice. I don't imagine you blow snow with your 830 there in NZ - have a look at mine here: Untitled Audio Video <object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/MH7j1PIDp7E&hl=en&fs=1&"></param><param name="allowFullScreen"...
  11. U

    830 Case - Cracked block, sleeve - coolant problem?

    Forgot to mention there is no oil getting into the coolant.
  12. U

    830 Case - Cracked block, sleeve - coolant problem?

    1968 830 Diesel Comfort King Case-o-matic: When the engine just starts to get warm - 30 or so seconds after starting it - coolant (cold) pushes out around the rad cap (new cap) and through the overflow tube uncontrolably. There is a bit of coolant getting into the oil as well. Previous owner...
  13. U

    830 Gas - Starter solenoid cross-reference help

    Hi. Can anyone help me cross-reference a number for a starter solenoid for an early Case 830 gas? (Tractor Serial 8173444) The case part no. is G44891 - NAPA needs a NAPA, Delco, Borg or Uni number to order as their books don"t have the cross-ref info. Thanks!
  14. U

    430 loader plumbing question

    I just brought home a 430 diesel (1967) with a loader. It is plumbed up with a push-pull switch that allows operation of the three point, OR the front-end loader - but not both. Can this be plumbed up better than that, without a complicated spiderweb of hoses? The three point needs to be tied...
  15. U

    model number

    Hi. I think you are looking at the engine tag there. Earlier 930 came with a 401 cubic inch engine, the other number is likely the serial number for the engine. The number tag on the right (or left?) of the steering wheel, rivited to the sheetmetal, will tell you more. Post your numbers here.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top