Recent content by vinnivee

  1. V

    656 brake shims

    This message is a reply to an archived post by wicksfield on March 19, 2018 at 16:21:11. The original subject was 656 brake shims. I need some brake shims for my IH 666....where can I get some? Thanks
  2. V

    IH 544 Shuttle shift

    This message is a reply to an archived post by doorman on February 19, 2014 at 19:38:32. The original subject was "IH 544 Shuttle shift". I bought a IH 544 row crop tractor and couldn't figure out the transmission. I come to find out that it has a (Shuttle Shift) transmission. It does not...
  3. V

    John Deere 3010 Hydraulic problem

    Jim, How do you increase the pressure? Is there a adjustment on the main pump? It is a syncromesh transmission. Vince
  4. V

    John Deere 3010 Hydraulic problem

    Hi Jim, I did place a gauge on it like you said and the pressure reads about 2000 PSI. Is that a problem? Vince
  5. V

    John Deere 3010 Hydraulic problem

    I have a early model John Deere 3010 and when I raise the 3 point hitch it is a real jerky and has loud screech.... I have change the fluid and the hydraulic filter and cleaned the hyd screen. Please tell me I dont have to replaced the main hydraulic pump. Vince 509 480 8412
  6. V

    Farmall Super M Hydraulics

    Thank so much....I connected the way you stated and it works well. One more question....what should I do with the Belly pump connections? Can they be used in conjunction with the live hydraulic system? Or should I just cap them off?
  7. V

    Farmall Super M Hydraulics

    I bought a Super M Farmall and all the hydraulic lines and fittings were removed. It has a belly pump and a live HYD pump installed but thats about it. I would like to know how to connect the live hydraulic system so I can operate the 3 point hitch and the remote outlets. ANy picture or...
  8. V

    John deere 3010 Hydraulics

    Where would you check that pressure?
  9. V

    John deere 3010 Hydraulics

    I changed the filter and added hyd fluid to the full mark. The hitch only works when I rev it up to 1200RPM. The steering doesnt work very well .... What now?
  10. V

    John deere 3010 Hydraulics

    I went to use my John deere 3010 Diesel this year and the hydraulics will not work. What do I need to check first other than the fluid level? Need help Vince
  11. V

    JD 3010 Hydraulic Pumpl Replacement

    This message is a reply to an archived post by j hikemper on February 12, 2011 at 04:53:27. The original subject was "Re: JD 3010 Hydraulic Pumpl Replacement". I have a JD 3010 Diesel and the hydraulics dont work at all.....where do I start? Filters or screens? Vince 509 480 8412
  12. V

    Farmall Super MD

    Jim, Thank you so much for the detailed process. I will definitely give it a go when the weather gets better. Vince
  13. V

    Super MD injector pump problems

    This message is a reply to an archived post by Eric Fox on April 28, 2010 at 13:25:41. The original subject was "Super MD injector pump problems". Eric, I have a Super MD and having a similar problem...cant get it to run on diesel. If you have got yours fixed please call me I could really use...
  14. V

    Farmall Super MD

    Jim, Thanks for the reply...its been really hard to find anyone who knows about these tractors. Even at the IH dealer. If you would send me an email at [email protected] I would a appreciate it or a phone call. I have done everything I can think of. Vince
  15. V

    Farmall Super MD

    I have a nice Farmall SUper MD that starts easily on gas and converts to diesel but will NOT rev up when the throttle is opened. What could be the problem? Vince 509 480 8412
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top