Recent content by Vmax

  1. V

    Case LA

    Went to fire up my Case LA. Starter made a bad sound. Pulled starter - pinion housing/starter nose and a couple of drive teeth had broken off. Got starter nose out. Checked to see if motor would turn over by hand - would not move either way. Checked for water in cylinders and oil - none found...
  2. V

    3 Bottom John Deere Plow

    Thanks for the info. Placed a 2" pipe cap over the end of the axle and against the end of the tapered cone. Two hits and it came loose. Z/
  3. V

    3 Bottom John Deere Plow

    Trying to remove the left wheel & tire from a 3 bottom pull type/rope trip plow. Removed the three bolts from the wheel casting and the pin and keeper from the axle shaft. The wheel casting is loose, moves back and forth on the axle shaft 1/4th inch but will not come off. There appears to be a...
  4. V

    1949 Case LA

    What is the correct oil filter for a Case LA? Oil canister is 4" x 6" with an oil line at the top and one at the bottom. Thanks Z/
  5. V

    1949 Case LA

    What is the correct oil filter a 1949 Case LA? The one I removed is an MF filter 4"x 6". Thanks Z/
  6. V

    Case LA

    Just bought a 1949 Case LA. Changed oil. Online specs say 15qts. Took 9qts. Where there different size pans for these engines? Magneto point sleeve (manual advance/retard for start/run) is rusted solid in run position. Does this matter when using electric starter. What is the test procedure for...
  7. V

    Farmall Rims

    Can Farmall 400 rims be put on a Farmall M ?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top