Recent content by WILL1E

  1. W

    More tractor troubles...need input please!

    I bought this tractor early this year. Up until this starting issue a week or two ago, i've had zero problems with starting the tractor. I've changed and done nothing with it. So i'm assuming everything was hooked up properly and that this issue is just something failing.
  2. W

    More tractor troubles...need input please!

    If i wanted to order up a solenoid to be prepared for my next trip up (tractor is 2hrs away), any idea which one i need since it's a converted 6 to 12 volt system? Prefer to order on amazon if possible.
  3. W

    More tractor troubles...need input please!

    What confuses me to is that there is 12+ volts at that little wire on the starter solenoid when i'm NOT touching the starter button, but then it drops to zero when i DO depress the button. I would have expected it to be the opposite.
  4. W

    More tractor troubles...need input please!

    But wouldn't what i did by hooking the jumper cable to the positive terminal of the starter essentially the same thing?
  5. W

    More tractor troubles...need input please!

    1955 Ford 850 that was converted to 12V by previous owner. A week ago i went to move the tractor for the first time in several weeks. Put the key in an zero anything when i depressed the starter button on it. So i just assumed the battery was dead. Hooked it up to my pickup to try and jump...
  6. W

    What size 12V battery fits a '55 850 Ford tractor?

    So my tractor is 2hrs away, hence the reason i'm asking here. I'm pretty sure my battery is toast so i pulled it before i left my place last time i was there. The tractor was converted to 12V and the battery that was in there was a Northern 26-675. I do know that the battery was kinda loose...
  7. W

    How do i fix fuel shut off screw?

    1955 Ford 850 The fuel shut off screw thats directly below the tank is leaking in the closed and open position. Is there a way to fix this without having to remove the entire valve or worse, the tank?
  8. W

    Where do i fill the loader hydraulics??

    Thanks everyone! So do i remove the reducer and everything above it, or do i remove whatever is above the reducer? 4-6" down....do i fashion some sort of dipstick to know that the fluid is at that point? Screen filter...is that the Y shaped silver thing in my bottom photo? Can i...
  9. W

    Where do i fill the loader hydraulics??

    My '55 Ford 850 has what i've been told is a Wagner front loader on it. The 2 main lifting hydraulics have slow leaks where the rod extends out of the housing. I've noticed lately that some of the movements have been getting jittery so i'm thinking the fluids are getting low. I've been...
  10. W

    Power steering troubleshooting on 800 series Ford

    The pipe going to the bottom of the tank is the large pipe going into the top of the steering pump. The pipe going into the top of the tank is the one that goes to the flow control valve...both shown in this picture:
  11. W

    Power steering troubleshooting on 800 series Ford

    The tank is mounted to the radiator. You can see it at the far right in this picture. It's in a horrible location as you can barely get the cap off.
  12. W

    Power steering troubleshooting on 800 series Ford

    Nothing is visible in it's current state and i don't really want to disassemble things at this point. I was hoping someone would recognize the system as i can't imagine there were.
  13. W

    Power steering troubleshooting on 800 series Ford

    Directly behind that power steering pump is a NEUMATICS brand "flow control valve". Would this have anything to do with how slow the power steering is working?
  14. W

    Occasional Irregular idle on 850

    This tractor is new to me and i'm new to tractors. I ran it about 4hrs this weekend trying to move 2 dump truck loads of gravel. During that time i had 2 instance where it ran like it was starving for fuel or running out of fuel. Sometimes i would have to increase the throttle all the way...
  15. W

    Power steering troubleshooting on 800 series Ford

    [b:624692c678]I've confirmed my tractor is an 850 model based on the case stamping.[/b:624692c678] I got up to my property to finally play with a tractor...had 2 dump trucks worth of gravel to move! After some clutch issues noted in another post, i had some belt squealing. Tightend up the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top