Recent content by Wilton

  1. W

    jd 4030

    Thanks for the help, i do have a 4020. It sounds like a better option. Grain dryer tractor.
  2. W

    jd 4030

    Thanks for the info Dave
  3. W

    jd 4030

    I want to use a jd 4030 as a stationary pto unit. Can I unhook the hydraulic pump and still use the pto?
  4. W

    what to look for - round baler

    I would look at a nh 855. You can make a smaller bale if you need to. They are easy to work on and understand. Parts are very common. Good luck
  5. W

    NH round baler belts

    Thanks Nathan, I'm looking for the show discount as well. I've used laced and endless belts over many thousands of bales and for me the endless has worked better.
  6. W

    NH round baler belts

    Anyone using endless belts from shoup for a new holland round baler?
  7. W

    A Oliver, 107 side delivery rake

    We just did a 207 rake. Took one apart and took the pieces to a bearing supplier. They matched it easily for $5.25 each. The threaded piece will press out and you need to press the bearing out of the casting. Good luck
  8. W

    Kubota diesels ????

    I have a B7100 I purchased very used. It is a tuff little tractor. I live in Minnesota and it is started when it is very cold! I put a hose heater on the radiator but only use once in a while on the coldest days. I do use the 10w-30 for diesel.
  9. W

    dryers

    I like the tox o wic type. Very simple. I have never had trouble with corn being ground up. They have a simple built in screen if you want to remove fines.
  10. W

    farmall f-14

    Did IH keep track of individual farmers who purchased tractors? My neighbor has a F-14 he's trying to find the original family who purchased it. There is no dealer tag. He thinks it might have been new from Putz IH Minnesota Lake Mn. Any info. on that dealer would be appreciated.
  11. W

    IH #82 Combine pros/cons

    I do still have the combine. I'm in southern Mn..
  12. W

    nh rb 560 round baler

    Anybody using the custom twine pattern on a new holland rb560 round baler. I'm trying to get more twine in the center of the bale.The cornstalks are tough this year.
  13. W

    9500 not cleaning beans

    I had the same problem. I could make it worse but making it better seemed difficult. Put the extension down to 6. Close the sieve a little and increased the fan speed 1250. When I switched varieties the problem went away.
  14. W

    electronic ignition h

    Thanks for your reply. The coil has not been changed.
  15. W

    electronic ignition h

    I had an electronic ignition put in h . Now after about ten minutes it quits. Then after thirty minutes it starts and runs for ten minutes again. It does have an external resistor. The coil feels hot when it quits.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top