Recent content by Zach81

  1. Z

    530 PTO utility

    Yes, but that was years ago on a 530 standard with different options. Sort of the same but different situation on that one. I private messaged Joe the other day but lost them. Figure is ask the masses instead of bugging him direct again.
  2. Z

    530 PTO utility

    Messaged Joe Wa on this but lost original message. I have a 530 utility with 31 loader that did not have PTO. Found a donor 310B and pulled the pto. It did not have a seal carrier on the shaft at all and it was the same with no internal hydro pump just the front mounted pump for the loader. My...
  3. Z

    800 Caseomatic proplem

    So my 59 800 will not work correctly work in Caseomatic as it just seems to stall out quickly after takeoff. Single disk lock up works fantastic. After much fiddling around I found out that if you depress the tredle and hold it down for about 10 seconds it will take off again for about the same...
  4. Z

    M&W plow coulters

    Does anyone out there have any parts or whole M&W trash master plow coulter? I have a 4 bottom plow that has them but one of them is needing some attention. Any help would be greatly appreciated. Thank you!
  5. Z
    Expired

    Wanted Small 3 point rotary hoe moved

    Small 3 point rotary hoe need moved from McArthur Oh to or close to Kokomo In
  6. Z

    Case 300 push rod tubes leaking oil.

    Yes there are rings. Must be pulled up to expose o-rings and replace. I believe when machine shops bake the heads it ruins the o-rings.
  7. Z

    Case 1030 remote valve issue

    The outside remote lever on my 1969 1030 seems somewhat floppy and when moved makes the valve squall like it's on its relief. Also found it is putting pressure to both top set of lines at the same time. I know that these are the pair so it has to be something internal to the valve. Other bad...
  8. Z

    530 Case-O-Matic Radiator

    Not sure if ones from 530 ck or 580 with tourque converter drive wouldn't work. Check this out on eBay. Item # 352696038553
  9. Z

    Case 430 Power Steering

    Before going about changing pump style does this tractor have the steering cylinder with the valve integrated on the end? Heavy duty front axle type? Have you pulled the top off reservoir and checked the filter condition? I've had a few of this style over the years. Replace filter, top off with...
  10. Z

    Looking for part for 470

    CaseIh should still be able to source it for you.
  11. Z

    Case 441 oil filler neck

    Updated her to Tier 4A emissions. Closed crankcase ventilation just like the new ones. Lol.
  12. Z

    Finishing touches

  13. Z

    Finishing touches

    I don't think I've posted in over a year, lost my password. Anyway wrapping up the restoration on my 530 I started a few years ago. Got 2 things tonight... 1. Anyone have a trick to get the steering wheel emblem on with the thick o-ring? New wheel and new emblem. It almost looks like the hole...
  14. Z

    Joe Demaijo

    Thank you to John Saeli for the number update!
  15. Z

    Joe Demaijo

    Hi, does anyone know if Joe is still restoring gauges? His phone is disconnected and it's the buisness number used for his gauge restoration buisness.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top